Manual

Rear Panel Description:

Below are the rear panel ports:

1. Power: Attach the included power supply here.

2. LAN: RJ45 10/100/1000 Ethernet port.

3. IR Outputs: eight (8) standard 3.5mm IR emitter ports with individual output

level adjustment screws.

4. Relays: two (2) programmable relays at NO, NC, or COM.

5. 12V OUT: two (2) programmable outputs. Each may be programmed to turn on,

off, or momentarily toggle.

6. Sensors: four (4) sensor ports that allow the programming of state dependent

and triggered macros. Compatible with all URC sensors.

7. RS232: four (4) RS-232 ports. Supports TX, RX, and GND connections for wired

two-way communication.