MC-75CD Network Camera Owner’s Manual
MC-75CD Indoor IP Camera Owner’s Manual ©2010 Universal Remote Control, Inc. The information in this manual is copyright protected. No part of this manual may be copied or reproduced in any form without prior written consent from Universal Remote Control, Inc. UNIVERSAL REMOTE CONTROL, INC. SHALL NOT BE LIABLE FOR OPERATIONAL, TECHNICAL OR EDITORIAL ERRORS/OMISSIONS MADE IN THIS MANUAL. The information in this manual may be subject to change without prior notice.
TABLE OF CONTENTS Introduction 1 Features and Benefits 1 Parts Guide 1 MC-75CD Front & Rear View under the Dome Cover 2 Specifications 3 USA Limited Warranty Statement 4 Federal Communication Commission Interference Statement 6
MC-75CD NETWORK CAMERA Introduction Congratulations on your purchase of the MC-75CD Premium Surveillance Dome IP Camera! The MC-75CD is an outdoor IP camera that allows for seamless viewing over the network with Total Control products such as the TRC-1280, TKP-2000 and MRX-10. Once joined to the network it will relay video over the CAT5 cable to the MRX-10 which will then send that information to the TRC-1280, TKP-2000 even to your PC. Features and Benefits Video viewable on the TRC-1280, TKP-2000 or PC.
MC-75CD NETWORK CAMERA MC-75CD Front & Rear View under the Dome Cover Front View under the Dome Cover Adjust for Up /Down Adjust for Right/Left Camera Module Factory Default Switch Adjust for Up/Down Description Adjust the position of camera module Up or Down (Needs to be fixed when installing) Adjust for Right/Left Adjust the position of camera module Right or Left (Needs to be fixed when installing) Name Factory Default Switch Camera Module Button to Set the Camera to Factory Default Values, DO NO
MC-75CD NETWORK CAMERA Specifications Video Encoding JPEG/H.264 (simultaneous dual stream) H.264/MJPEG H.264/H.264 (true H.264 dual streaming) Simultaneous streaming with independent control Resolution D1 - 720x480 (NTSC) / 720x576 (PAL), 4CIF - 704x480 (NTSC) / 704x576 (PAL), CIF - 352x240 (NTSC) / 352x288 (PAL), QCIF - 160x112 (NTSC) / 160x144 (PAL) Audio Encoding 8 bit PCM (G.
MC-75CD NETWORK CAMERA USA Limited Warranty Statement Your Universal Remote Control, when delivered to you in new condition, is warranted against defects in materials or workmanship as follows: UNIVERSAL REMOTE CONTROL, INC. warrants this product against defects in material or workmanship for a period of one (1) year and as set forth below.
MC-75CD NETWORK CAMERA LIMITATION OF REMEDIES UNIVERSAL REMOTE CONTROL SHALL NOT BE LIABLE FOR ANY INCIDENTAL OR CONSEQUENTIAL DAMAGES FOR BREACH OF ANY EXPRESS OR IMPLIED WARRANTY OR CONDITION ON THIS PRODUCT.
MC-75CD NETWORK CAMERA Federal Communication Commission Interference Statement This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation.
NOTE Page 7
500 Mamaroneck Avenue, Harrison, NY 10528 Phone: (914) 835-4484 Fax: (914) 835-4532 www.universalremote.
