Operating instructions
Table Of Contents
- Comfort Panels
- Legal information
- Preface
- Table of contents
- 1 Overview
- 2 Safety instructions
- 3 Mounting and connecting the HMI device
- 3.1 Preparation for mounting
- 3.2 Mounting the device
- 3.3 Connecting the device
- 3.3.1 Notes on connection
- 3.3.2 Connecting the equipotential bonding circuit
- 3.3.3 Connecting the power supply
- 3.3.4 Connecting the configuration PC
- 3.3.5 Connecting the PLC
- 3.3.6 Connecting a USB device
- 3.3.7 Connecting a printer
- 3.3.8 Connecting an audio device
- 3.3.9 Switching on and testing the HMI device
- 3.3.10 Securing the cables
- 4 Commissioning the device
- 4.1 Overview
- 4.2 Using the service concept
- 4.3 Operating the device
- 4.4 Configuring the device
- 4.4.1 Reference for functions
- 4.4.2 Changing settings for operation
- 4.4.3 Changing password protection
- 4.4.4 Changing HMI device settings
- 4.4.4.1 Setting the date and time
- 4.4.4.2 Changing regional settings
- 4.4.4.3 Backup registry information
- 4.4.4.4 Changing monitor settings
- 4.4.4.5 Setting the screen saver
- 4.4.4.6 Changing the printer properties
- 4.4.4.7 Enabling sound and setting sound volume
- 4.4.4.8 Assigning sound to an event
- 4.4.4.9 Restarting the HMI device
- 4.4.4.10 Displaying information about the HMI device
- 4.4.4.11 Displaying system properties
- 4.4.4.12 Displaying memory distribution
- 4.4.5 Setting storage location
- 4.4.6 Setting the delay time
- 4.4.7 Setting the uninterruptible power supply
- 4.4.8 State of uninterruptible power supply
- 4.4.9 Enabling PROFINET services
- 4.4.10 Synchronizing the time via the time server
- 4.4.11 Changing transfer settings
- 4.4.12 Configuring network operation
- 4.4.13 Changing Internet settings
- 4.4.14 Saving to external storage device (backup)
- 4.4.15 Restoring from external storage device
- 4.4.16 Activate memory management
- 5 Commissioning a project
- 6 Operating a project
- 7 Maintenance and care
- 8 Technical specifications
- 8.1 Certificates and approvals
- 8.2 Directives and declarations
- 8.3 Dimension drawings
- 8.3.1 Dimension drawings of the FKP400 Comfort
- 8.3.2 Dimension drawings of the KP700 Comfort
- 8.3.3 Dimension drawings of the KP900 Comfort
- 8.3.4 Dimension drawings of the KP1200 Comfort
- 8.3.5 KP1500 Comfort dimension drawings
- 8.3.6 Dimension drawings of the KTP400 Comfort
- 8.3.7 Dimension drawings of the TP700 Comfort
- 8.3.8 Dimension drawings of the TP900 Comfort
- 8.3.9 Dimension drawings of the TP1200 Comfort
- 8.3.10 Dimension drawings of TP1500 Comfort
- 8.3.11 Dimension drawings of TP1900 Comfort
- 8.3.12 Dimension drawings of TP2200 Comfort
- 8.3.13 Dimensions for labeling strips
- 8.4 Technical specifications
- 8.5 Bit assignment of the direct keys
- 8.6 Description of the ports
- 8.7 Communication with PLCs
- 8.8 Scope of functions with WinCC
- A Technical Support
- B Abbreviations
- Glossary
- Index
Overview
1.6 Software options
Comfort Panels
Operating Instructions, 03/2012, A5E03404994-02
23
1.6 Software options
The following software add-ons are available for the HMI devices:
Add-on Description
WinCC /Sm@rtServer
1
The WinCC /Sm@rtServer add-on enables you to access
a remote HMI device from the HMI device or PC via
Ethernet. It also enables you to set up communication
between different HMI systems.
WinCC /Audit
1
The WinCC /Audit add-on extends the HMI device to
include functions for recording operations in an audit trail
and electronic signature.
Uninterruptable Powersupply (UPS) with
USB support
2
When interfacing an uninterruptible power supply, the
HMI device is shut down in a controlled manner after a
buffer time in the event of a power failure. The HMI
devices support SITOP DC UPS modules connected via
the USB port.
Microsoft Excel Viewer
3
Microsoft Excel Viewer enables you to display Excel
documents.
Microsoft PDF Viewer
3
Microsoft PDF Viewer enables you to display PDF
documents.
Microsoft Word Viewer
3
Microsoft Word Viewer enables you to display Word
documents.
Printer driver The printer driver option enables PostScript, HTML and
PDF output for all HMI device print options.
1
Transferred with the project; a license key is required for use
2
Must be transferred as an option; no license key is required for use
3
Pre-installed; no license key is required for use
See also
Printers approved for SIMATIC Panels and Multi Panels
(http://support.automation.siemens.com
/WW/view/en/11376409)
Printing with SIMATIC Comfort HMI devices
(http://support.automation.siemens.com
/WW/view/en/58205602)