Operating instructions
Table Of Contents
- Comfort Panels
- Legal information
- Preface
- Table of contents
- 1 Overview
- 2 Safety instructions
- 3 Mounting and connecting the HMI device
- 3.1 Preparation for mounting
- 3.2 Mounting the device
- 3.3 Connecting the device
- 3.3.1 Notes on connection
- 3.3.2 Connecting the equipotential bonding circuit
- 3.3.3 Connecting the power supply
- 3.3.4 Connecting the configuration PC
- 3.3.5 Connecting the PLC
- 3.3.6 Connecting a USB device
- 3.3.7 Connecting a printer
- 3.3.8 Connecting an audio device
- 3.3.9 Switching on and testing the HMI device
- 3.3.10 Securing the cables
- 4 Commissioning the device
- 4.1 Overview
- 4.2 Using the service concept
- 4.3 Operating the device
- 4.4 Configuring the device
- 4.4.1 Reference for functions
- 4.4.2 Changing settings for operation
- 4.4.3 Changing password protection
- 4.4.4 Changing HMI device settings
- 4.4.4.1 Setting the date and time
- 4.4.4.2 Changing regional settings
- 4.4.4.3 Backup registry information
- 4.4.4.4 Changing monitor settings
- 4.4.4.5 Setting the screen saver
- 4.4.4.6 Changing the printer properties
- 4.4.4.7 Enabling sound and setting sound volume
- 4.4.4.8 Assigning sound to an event
- 4.4.4.9 Restarting the HMI device
- 4.4.4.10 Displaying information about the HMI device
- 4.4.4.11 Displaying system properties
- 4.4.4.12 Displaying memory distribution
- 4.4.5 Setting storage location
- 4.4.6 Setting the delay time
- 4.4.7 Setting the uninterruptible power supply
- 4.4.8 State of uninterruptible power supply
- 4.4.9 Enabling PROFINET services
- 4.4.10 Synchronizing the time via the time server
- 4.4.11 Changing transfer settings
- 4.4.12 Configuring network operation
- 4.4.13 Changing Internet settings
- 4.4.14 Saving to external storage device (backup)
- 4.4.15 Restoring from external storage device
- 4.4.16 Activate memory management
- 5 Commissioning a project
- 6 Operating a project
- 7 Maintenance and care
- 8 Technical specifications
- 8.1 Certificates and approvals
- 8.2 Directives and declarations
- 8.3 Dimension drawings
- 8.3.1 Dimension drawings of the FKP400 Comfort
- 8.3.2 Dimension drawings of the KP700 Comfort
- 8.3.3 Dimension drawings of the KP900 Comfort
- 8.3.4 Dimension drawings of the KP1200 Comfort
- 8.3.5 KP1500 Comfort dimension drawings
- 8.3.6 Dimension drawings of the KTP400 Comfort
- 8.3.7 Dimension drawings of the TP700 Comfort
- 8.3.8 Dimension drawings of the TP900 Comfort
- 8.3.9 Dimension drawings of the TP1200 Comfort
- 8.3.10 Dimension drawings of TP1500 Comfort
- 8.3.11 Dimension drawings of TP1900 Comfort
- 8.3.12 Dimension drawings of TP2200 Comfort
- 8.3.13 Dimensions for labeling strips
- 8.4 Technical specifications
- 8.5 Bit assignment of the direct keys
- 8.6 Description of the ports
- 8.7 Communication with PLCs
- 8.8 Scope of functions with WinCC
- A Technical Support
- B Abbreviations
- Glossary
- Index
Technical Support
Comfort Panels
208 Operating Instructions, 03/2012, A5E03404994-02
8.7 Communication with PLCs
Number of connections
Connection KP400 Comfort
KTP400 Comfort
KP700 Comfort to KP1500 Comfort
TP700 Comfort to TP2200 Comfort
Number using a bus connection 4 8
Number of connections based on
"SIMATIC HMI HTTP Protocol"
4 8
NOTICE
Communication faults with PROFINET IO
If you enable PROFINET services in the Control Panel of the HMI device, communication
problems can occur if you use PLCs from other manufacturers.
PLCs that are not compatible with PROFINET services are noted in the following table in
the footnote. Do not enable PROFINET services for these PLCs.
PLCs
The following table shows the PLCs and the communication drivers which can be used with
the HMI devices.
PLC HMI devices
SIMATIC S7-1200 Yes
SIMATIC S7-300/400 Yes
SIMATIC S7-200 Yes
SIMATIC HTTP protocol Yes
OPC
1
Yes
OPC UA Yes
Allen-Bradley EtherNet/IP Yes
Allen-Bradley DF1 Yes
2, 3
Mitsubishi MC TCP/IP Yes
Mitsubishi FX Yes
3
Modicon Modbus TCP/IP Yes
Modicon Modbus RTU Yes
3
Omron Hostlink Yes
3
1
OPC-XML DA Server
2
Direct communication with PLC 5, with the KF2 module, otherwise approved only via the optional
converter RS422-RS232, order number 6AV6 671-8XE00-0AX0.
3
"PROFINET IO Enabled" must be disabled.