Operating Manual Multimedia Remote Control SL-9000

4 Press either the SAT Device Button to set-up for SAT

Channel Control or the CBL Device Button to set-up for

Cable Channel Control. Either SAT or CBL will

flash

in the LCD, depending on the Device Button selected.

SAT or Cable Channel Controls will now override the

original CHANNEL UP and DOWN in this mode.

To Return to the Original Setting:

Select the mode that you want to turn off the Channel

Control “Punch Through.”

2 Press the corresponding Device Button and the MUTE

button, simultaneously. SET will appear in the LCD.

3 Press the VOLUME DOWN button. PUNCH will appear

in the LCD.

4 Press the same Device Button again. The DEVICE Mode

will flash in the LCD.

The SAT or Cable Channel Control “Punch Through” is

now turned off. The CHANNEL UP and DOWN of the

original device will now operate on the remote control.

Advanced Features