Operating Manual Multimedia Remote Control SL-9000

4 Press the ENTER button. SAVE will flash twice and the

LCD will return to AUDIO indicating that the joined

function has been stored.

Every time that the

Device button

is pressed it will also emit

the

joined

function.

To erase a

joined

function from a

Device button:

1 Press the AUDIO and ENTER buttons simultaneously on

the remote control. JOIN will appear in the LCD.

2 Press the Device button that you would like to erase a

joined function. CLEAR will flash and INPUT will then

appear in the LCD.

3 Press the ENTER button. The LCD will flash SAVE twice

and return to AUDIO indicating that the join has been

erased.

Main Device Mode

When the main device is displayed in the LCD, the

SL-9000 will perform all of the preprogrammed, joined,

learned and punch through features for that device mode.

Automatic Audio Mode

The remote is defaulted to the Automatic Audio. When the

remote control is in this mode, pressing a Device button a

second time will display A_XXX in the LCD indicating that

the Volume and Mute controls of the device programmed

into the Audio mode of the SL-9000 is active, while full

function control of all other buttons of the current Device

mode is maintained.

Using Your Remote

Main Device Mode Automatic Audio Mode