Operating Manual Multimedia Remote Control SL-9000

Erasing All Buttons in One Device Mode:

1 Press the Device button for the mode to be erased.

2 Press and hold the Device and SEL/PLAY buttons

simultaneously, for about 3 seconds, until the LCD

shows LEARN.

3 Press and hold the Device and LIGHT buttons simulta-

neously for approximately five seconds and then release

the buttons. The LCD will flash ERASE and then alter-

nately CLEAR and the Device Mode.

Note: When the LCD on the remote returns to the Device

Mode, all the learned functions in the selected Device mode have

been erased. All the buttons in that Device mode will now oper-

ate with the preprogrammed functions in that mode.

Erasing All Buttons in All Device Modes

1 Press and hold the TV Device Button and the LIGHT

button simultaneously, for approximately ten seconds.

The LCD will flash ERASE ten times, flash CLEAR

and then return to the TV mode.

When the LCD on the remote returns to TV, all the

learned functions in all eight Device modes have been

erased. All the buttons in all Device modes will now oper-

ate with the preprogrammed functions in their respective

modes.

Using Your Remote