Operating Manual Multimedia Remote Control SL-9000

8 Press and hold the DEVICE button and the SEL/PLAY

button simultaneously, once again. SAVED will flash

three times in the LCD and return to the DEVICE mode,

indicating that the programming has been stored.

Erasing Learned Functions

To erase learned functions, please refer to the following

procedures:

Erasing Individual Buttons:

1 Press the Device button for the mode where the learned

function has been stored.

2 Press and hold the Device and the SEL/PLAY buttons

simultaneously, for about 3 seconds, until the LCD

shows LEARN.

3 Press and release the button to be erased. The LCD will

show READY.

4 Press the LIGHT button. The LCD will flash ERASE,

CLEAR, the Device Mode and then return to LEARN.

Repeat Steps 3 and 4 for any other buttons to be erased.

5 To return to the normal operating mode, press the

Device and the SEL/PLAY buttons simultaneously.

The learned functions on the selected buttons have now

been erased. The preprogrammed functions for these

buttons will now operate on the remote control.

Using Your Remote