User guide

46
Centrex IP and Conventional Centrex Configuration
Centrex IP Client Manager Documentation References
• DMS-MMP Base Product Description
•
NTP-297-5551-300,
Centrex IP Client Manager Administration Guide
•
NTP-297-5551-900,
m6350 Installation Guide
•
NTP-297-5551-901,
m6350 TAPI Service Provider Installation and
Troubleshooting Guide
• NTP-297-5551-920, i2004 Installation Guide and User Manual
• NTP-297-5551-100, Centrex IP Client Manager Network Eng. Guide
Event Logs
Besides the existing DMS logs related to RLCM, the Gateway software
generates Windows NT event logs for various cases such as E1/T1 software
faults, DSP faults, client session events, and initialization logs. Audits of
user login successes or failures are also generated as event logs. Logs can
be reviewed remotely on the Administration LAN from within the
web-based Element Manager interface or by running the Windows NT
event viewer.
There are five categories of logs:
• Error. Error logs indicate a critical event, where the Gateway is in a crit-
ical condition, such as failure to initialize hardware, or out of memory.
• Warning. Warning logs indicate a non-critical event, and are usually
• generated after a logic error has been detected in the software and recov-
ery action has been taken.
• Informational. Informational logs provide information about the state
of the Gateway.
• Success audit. Success audit logs provide details of successful logins. A
success audit event is generated when the user has successfully logged
in. Failure audit. Failure audit logs provide details of failed login
attempts. A failure audit event is generated if:
– A user has tried to log in to a currently running session.
– A user has provided incorrect login information.
– A user has exceeded the maximum number of failed login attempts
(datafillable at the gateway).
Centrex IP
Gateway
Frame
NT6X50 DS1 (T1)
for LGC/LTC
LGC/LTC/PLGC
NT6X27 PCM30 (E1)
for PLGC
Brooktrout
N 300 TDM
Access Card
S
E1 or T1
TDM Links
DMS-100 Switch
Centrex IP Client
(m6350 user interface
for m6350 application)
IP Network
Centrex IP Client
(i2004 Ethernet
IP
Data
Client LAN
NT6X50 DS1 (T1)
for LGC/LTC
LGC/LTC/PLGC
NT6X27 PCM30 (E1)
for PLGC
RLCM/LCM
E1 or T1
TDM Links
Meridian
Business
Set (MBS)
Centrex IP
Client Manager
Configuration
Conventional
Centrex
Configuration