User guide

44
SMDI continues.
Message Waiting Utility Commands:
>MWQ activates the message waiting query utility.
>HELP MWQ displays the subcommands and their descriptions.
>STATUS <dn> display messages waiting for DN with MWT/EMW option.
>RESET <dn> clears messages for DN with MWT or EMW option.
>DEQ <dn> <L,M,C> dequeues the requestor from the requestee.
>QUEUE <dn> <L,M,C> <opt> queue the requestor from the requestee.
Process States for SMDI: Should show
>QUERY PROCESS SMDIICT 'queued on event'
>QUERY PROCESS SMDIOG ‘queued on flag’ (1 per 1X67)
>QUERY PROCESS SMDIINC ‘queued on mailbox’ (1 per 1X67)
>QUERY PROCESS SLMPCOGT ‘queued on flag’ (1 per 1X89)
>QUERY PROCESS SMDINMPC ‘queued on flag’ (1 if using 1X89)
>QUERY PROCESS SMDIAUDP ‘queued on time’
The following command may be helpful for reviving MPC processes:
>MAPCI;MTC;IOD;IOC x;CARD y;REVIVE ALL %%x = IOC # y = CARD #
The following command provides all the lines assigned to a UCD group
from line number 1 (LINE_NO: 1) and up:
>SMDIDISP LINE_TABLE GROUP 0 %%0 is first entry in table UCDGRP
that has the ucd_smdi option
UCDQUERY Utility
>UCDQUERY activates the UCDQUERY utility.
>QUIT quits from the UCDQUERY environment.
>HELP displays UCDQUERY commands.
>SETGROUP sets the global group parameter.
>CLEARGROUP clears the global group parameter.
>SHOWGROUP displays the global group parameter.
>QUERY displays the UCD data structures.
>UCDDNS displays list of UCD DNs.
Example of QUERY:
>QUERY RUNNINGTOTALS GROUP COVM
UCD RUNNING TOTALS FOR UCD GROUP 1 (“COVM”):
Total UCD Agents Enqueued: 48
Total UCD Agents in BUSY queue: 0
Total UCD Agents in IDLE queue: 48
Total Incoming Calls: 0
IS EMPTY.
Total P0 Call Queue Size 0
IS EMPTY.
Total P1 Call Queue Size 0
IS EMPTY.
Total P2 Call Queue Size 0
IS EMPTY.
Total P3 Call Queue Size 0
IS EMPTY
Example of UCDDNS Command:
>UCDDNS GROUP COVM
UCD Directory Numbers For UCD Group COVM
Primary UCDDN: 619 675 4555
Call Priority: 0
MONMPC CI: Level Commands
>QUIT quits MONMPC level.
>MPCSTART starts recording MPC messages onto a device.
>MPCSTOP stops recording MPC messages onto a device.
>MPCPRINT parses the files and displays to terminal.
>STARTMSGS starts monitoring for a specified MPC.
>STOPMSGS stops monitoring for a specified MPC.
>DISPLAY displays captured MPC messages to the user.
>ZAPDATA clears the MPC message table.
>QUERY displays current MONMOCCI status information.
>FORMAT determines how captured data will be displayed.
>DEALLOC halts message capturing & deallocates MONMPC memory.
>CAPTURE initiates capturing of MPC messages from started MPC.
Example of MONMPC:
>MPCSTART <mpc #> <device> %% fname will be RECFILE
Make test calls then: >MPCSTOP <mpc # or all>
>MPCPRINT <filename>
SMDI References
Table s: TERMDEV, SLLNKDEV, UCDGRP, and DNROUTE. Also, see tables
MPC & MPCLINK if using 1X89 MPC card instead of 1X67FA card.
Documentation: NTP 297-2051-104,
SMDI Set-up and Operation
NTP 297-YYYY-350, Translations Guides
LOGs: SMDI, SLNK, IOD, MPC, SWER
OMs: SLLNK & SLLNKINC
Eng. Parameters: AUXCP_CPU_SHARE (1X89),
CFGDA_SEND_PILOT_DN_TO_SMDI_ISUP (CCM04),
FTRQ2WPERMS, FTRQ8WPERMS