User guide

19
CLASS Quick References
(NTP 297-1421-503, Subscriber Services Maintenance Guide)
(NTP 297-YYYY-350, Translation Guides)
NOTE: See page 100 for the DRAMREC Utility and subcommands that
can be used to manage CLASS announcements on DRAMs and EDRAMs.
REVXLVER CI: Level Command
This is a datafill verification utility that simulates reverse translations from
a specified origination to a specified destination.
Note: If no netname is specified, then the default of public is used.
REVXLER Command and Variables:
>REVXLVER <SUB> {AR <DN> STRING
<DIGITS> STRING
<TRACE> {T,
NT,
B}
[<NETNAME> STRING]
[<COMPARE> STRING],
ACB <DN> STRING
<DIGITS> STRING
<TRACE> {T,
NT,
B}
[<COMPARE> STRING],
DDN <DN> STRING
<DIGITS> STRING
<TRACE> {T,
NT,
B}
[<NETNAME> STRING]
[<INTL> STRING],
R <DIGITS> STRING
<RXLANAME> STRING,
RLT <DN> STRING
REVXLER Example:
>REVXLVER AR 6750009 9196752034 B
TABLE IBNLINES
HOST 00 0 02 17 0 DT STN IBN 6750009 EBS01 0 0 360 (ACB) (AR)$
TABLE CUSTNTWK
EBS01 PUBLIC 24 (PUBLIC MDCAR 10) (CLID OFFNET)
TABLE DNREVXLA
MDCAR 919 919 (LOCAL 3 9 N)
TABLE DNREGION
LOCAL 919675 919675 (Digits used to call 9196752034 from 6750009)
CNAMDVER CI: Level Command
This command allows us to check the name and the permanent privacy sta-
tus associated with the name at the SCP database without making an actual
call.
>CNAMDVER <Calling Number (10 digits)> STRING
<Calling Number Presentation (0-allowed, 1-restricted)>
{0 TO 1} [<Timeout (in seconds)> {0 TO 255}]
QSL CI: Level Command
The CI level command QSL provides detailed lists for each Screening List
Editing (SLE) feature on a specified line. The line can be specified by
either DN or LEN. One or all features can be specified. When parameter
ALL is selected, information is given in FULL format; when one feature is
specified, the subscriber can select FULL or HEX format.
>QSL <dn or len> <SLE feature name or ALL> <FULL or HEX>
TESTAME CI: Level Command
Test Analog Display Services Interface (ADSI) support command.
>TESTAME <Application> <Function> <Directory Number>
MAKERES Utility
This command converts POTS lines to RES lines over a given range of
LENs. Subcommands are CONVERT, DELOPT, COPY, &
CHECKCM.
CLASS commands continue on the next page.