User guide

Please read before using
The 2002 DMS-100F Quick Reference Guide provides a quick ref-
erence for commonly used commands, utilities, tools, hardware,
and other job-supporting information. The intent of this document
is not to replace Nortel Networks Technical Publications (NTPs)
and other supporting documents. Its purpose is to consolidate as
much usable job-related information as possible into a small
pocket-size document for quick reference and on-the-job use.
The 2002 DMS-100F Quick Reference Guide is intended for both
Tier I and Tier II support users. Tier II support tools are segregated
in an area near the back of the guide. Since the misuse of these
tools could impair service, they should only be used by technicians
that have been trained in their use.
When there is a question about the technical accuracy of this docu-
ment and its contents, the NTPs and other supporting documents
have the final authority. Where possible, the information in this
guide makes references to NTPs and other supporting documents.
Those documents should be referenced for
warnings
,
cautions
,
and other
advisory
information that may not exist in this guide due
to the limitation of space.
Hardware displayed in this document provides examples for refer-
ence to circuit pack slot locations. For most of the examples, the
vintages (releases) of various packs are not shown due to space lim-
itations. Hardware examples may not be exactly as your office is
provisioned due to optional pack assignments and the quantity of
circuits equipped. For a list of packs and their vintage application,
reference the PEC Code list and the circuit pack description area of
this guide. Other supporting information can be found in the DMS-
100F Baseline Report and NTP 297-8991-805.
Some of the hardware listed within this guide has been manufacture
discontinued (MD’d). It has been left in the guide to support MD’d
hardware that is inservice, and in most cases, still supported.
For customers to order copies of this document within North Amer-
ica, call toll free 1-877-662-5669 (Option 2, then Option 1). Nortel
employees can order copies through Internal Distribution or
through the Documentation Ordering Tracking System (DOTS)
(see IDS Home Page at http://zrtps08m.us.nortel.com/).
Any customer comments, suggestions, or corrections should be
made through your Nortel Networks Regional Support Center.
©
2002 Nortel Networks
Printed in the United States of America.
This document, or parts thereof, may not be reproduced without
the written permission of Nortel Networks.
Nortel Networks Confidential:
The information contained in this
document is the property of Nortel Networks. Except as specifically autho-
rized in writing by Nortel Networks, the holder of this document shall keep
the information contained herein confidential and shall protect same in
whole or in part from disclosure
and dissemination to third parties and use
same for evaluation, operation, and maintenance purposes only.
Information is subject to change without notice. Nortel Networks reserves
the right to make changes in design or components as progress in engineer-
ing and manufacturing may warrant.
Nortel, Nortel Networks, DMS, DMS SuperNode, DMS-STP, and MAP
are examples of trademarks of Nortel Networks. All other trademarks are
the property of their respective holders.