Flat Panel Universal Remote Control Indoor Antenna CONTROL UP TO 10 A/V DEVICES Number: UR39677 Model Model Number: FDA38558 INSTRUCTIONAL MANUAL INSTRUCTION MANUAL After Sales Support Telephone: Internet: After Sales Support 1300 663 907 www.winplus.com.au Telephone: Internet: 1300 663 907 www.winplus.com.
1 26 Flat Panel Indoor Antenna Flat Panel Indoor Antenna Universal Remote Control - 10 in 1 Universal Remote Control - 10 in 1 Warranty Details The product is guaranteed to be free from defects in workmanship and parts for a period of 12 months (dependant on product) from the date of purchase. Defects that occur within this warranty period, under normal use and care, will be repaired, replaced or refunded at our discretion.
25 2 Powering All Devices On/Off Welcome You can power on or off all devices simultaneously. Proceed as follows: Congratulations on choosing to buy a BAUHN® product. By doing so you now have the assurance and peace of mind that comes with purchasing a product made by one of the leading manufacturers.
General Safety Instructions 3 Read this manual thoroughly before first use and keep it in a safe place for future reference, along with the warranty card, purchase receipt and carton. The safety precautions enclosed herein reduce the risk of fire, electric shock and injury when correctly adhered to. Follow all instructions and take notice of all warnings to reduce the risk of fire or electric shock. • Do not expose this product to water, rain, moisture or dust.
23 4 Setting the Time Product Use The time is shown on the remote control display. You can set it as follows: This product is designed to control up to 10 AV devices using one remote control. The remote control can replace your old remote controls, using the learning function to mimic their exact function. The extensive code library features most common models of DVD players, TVs, and CD players, allowing you to quickly program the universal remote for your particular AV setup. 1.
Getting Started 5 In this manual, the remote control keys are represented in capital letters, followed by a number in brackets that represents the key number. Key numbers are shown in the next section, remote control keys. For example: OK (22) 22 Erasing Favourites 1. Press and hold the SET button (21) for at least 3 seconds. The display shows [CODE SETUP]. 2. Then release the SET button (21). 3. Press Messages displayed on the remote control’s screen are represented in squared brackets.
21 Favourites 6 1. On/Standby button This function lets you program up to 15 channels from any channel presets of your receivers (TV or STB) and easily recall them. 2. Source device selection buttons (TV, STB, CBL, AUDIO, PC, VCR, DVD, CD, DVR, AUX) * 3. Numeric keys (0 to 9) 4. Toggle button for one or two-digit input Programming Favourites This function supports the source device buttons TV and STB only.
7 While sending a command by pressing a button, the display and buttons backlight illumination will turn off. As soon as you release the button the backlight illumination will turn on again. This is not a fault: it has been designed to maximise the transmission range. The described button functions are available only whenever the programmed device supports these functions.
19 Consistent Volume Control The (VPT–Volume Punch Through) volume control guarantees that the volume control is always made for the TV set or Hifi equipment regardless of the sound source that you have selected. Therefore, you will not have to press the TV or AUDIO source buttons before you set the volume with the VOL+ (10), VOL- (11) or MUTE (7) buttons. Example: The remote control is programmed for your TV set and your DVD player. You play a DVD and the remote control is set to the DVD (2) source.
9 6. Now enter the first letter of the desired manufacturer by using the numeric keypad. The letter assignment is equivalent to the keypad on a mobile phone. Special Features 18 Controlling a PC To be able to control a computer, your computer must feature a compatible infrared receiver. The universal remote control includes the command set for Microsoft Media Centre. 1. Press the source device selection button (2) and select the PC mode. The message [PC] will appear on the display. 2.
17 10 Executing a Macro Entering Device Codes Directly 1. Press the MACRO button (28). No message will be displayed. Switch on the device for which you want to program the remote control. If your device is a VCR or a CD or DVD player, please insert a tape or CD/DVD. 2. Within the next 15 seconds, press any of the numeric buttons (3) 1 to 6. The numeric button 1 corresponds to Macro 1, the numeric button 2 corresponds to Macro 2, etc. 3. The macro will be executed immediately.
11 10. Press the OK button (22) to confirm the entered device code. The message [SUCCESS] will appear for a few seconds and the device returns to the previous menu [CODE SET]. If the message [NOT FOUND] appears on the display, the entered information was wrong and has to been entered again. After a few seconds, the display will return to the device code entry mode. 11. Quit the programming mode by pressing the EXIT button (23) twice. 12. Verify the device functionality.
15 5. Press (8) twice. The display shows [DELETE DEV]. 6. Press the OK button (22). The display shows [SELECT DEV]. 7. Press the source device selection button (2) of the device for which you want to erase all programmed information. The display shows [SURE DELET]. 8. Press the OK button (22) to confirm the deletion. If there is a large number of assigned key codes, the deletion may take some time. During this process, the display will show [WAITING]. 9.
Learning Function 13 For the learning function you must have the original remote control unit of the device you want to program, and this remote control unit must be working properly. The learning function lets you have the original remote control unit teach the different button functions to your new universal remote control. This lets you add or edit any specific buttons that do not work properly when using a preset device code or control a device whose device code is not available. 14 10.
