Owner’s Manual
Thank You! Thank you for purchasing the Unifier™ URC-100 Pre-Programmed and Learning Remote Control. The Quick Setup DVD tutorial supplied with the Unifier demonstrates the process of setting up and automating a home entertainment system. Watch the DVD first to familiarize yourself with the capabilities of the Unifier and the process of setup. This manual is designed to assist you step-by-step as you setup the Unifier to replace all of your remote controls and automate your home entertainment system.
Table of Contents Getting Started.......................................................... 2 Button Layout ........................................................... 3 Basic Operation ........................................................ 4 Basic Setup................................................................ 5 Pre-Programmed Method........................................... 5 Learning Method ....................................................... 8 Volume Control Punch Through ...................
The Unifier Getting Started Congratulations! You’ve purchased one of the most advanced and easy to setup remote controls ever made. The Unifier’s built-in library includes thousands of different brands and models of remote controls. In most systems, all you have to do to setup the Unifier is enter which brands and models you own. If you own a component too new to be in the library, the Unifier uses advanced DoubleTapTM learning technology to quickly set each Unifier button, one at a time.
URC-100 Button Layout LIGHT Button DISPLAY DEVICE Buttons SHIFT Button FUNCTION Buttons 3
The Unifier Selecting a New DEVICE Changes All Button Commands Instantly The Unifier can operate eight different devices even though it is only one remote control. Let’s try it now! Press the CABLE DEVICE button. The top of the screen changes to CABLE. Now all of the buttons of the Unifier operate a Cable box. To operate any of the other devices, simply press one of the eight device buttons. CABLE DEVICE Button SHIFT Button The SHIFT Button Press SHIFT to access a second command for each button.
URC-100 Basic Setup You can start setting up your Unifier using either the Pre-Programmed Method or the Learning Method. However, all the buttons of the Unifier are setup at once with the Pre-Programmed Method, so it is usually faster than the one-button-at-a-time Learning Method. Pre-Programmed Method 1 Power on the A/V component you wish to setup, so that you can test codes by sending power off commands.
The Unifier 4 Choose the name of the device you’d like to setup. Use the cursor LEFT or RIGHT buttons to change the flashing name. For Example: I wanted to setup the TV Device button first, so I pressed the cursor LEFT or RIGHT until “TV” was flashing on the display. LEFT 5 RIGHT Point the Unifier at the component, then enter the first three digit code number from your notes using the numbered buttons. After you enter each three digit code number, look at the component to see if it turned off.
URC-100 Note: If your component fails to turn off after you have entered all the code numbers listed for your brand, you can scan through the other brands in the table by alternately pressing the Channel Up(or Down) and Power Off buttons (there is a chance that your component was actually manufactured by another brand). However, most of the code tables are so large that it is usually faster to use the Learning Method on Page 8. Channel Up and Down scan code numbers.
The Unifier Learning Method The Unifier can learn commands from your old remote controls one-button-at-a-time by following these simple steps: 1 Line-up the Unifier with your old remote control, head-to-head, one or two inches apart. 2 Press and hold both the desired DEVICE button and the SELECT button for approximately three seconds. The top of the display will show “LEARN”. You are in LEARN mode now. Note: You have 30 seconds to perform a step while you are in LEARN mode.
URC-100 3 Press any button you want to teach a command to. Press any Button. Once you press a button, the top of the display will change from “LEARN” to “READY”. READY SHIFT Functions: You can teach a second additional command to a button by pressing the SHIFT button, then pressing the button you want to teach. Additionally, using the SHIFT button, you may teach commands to the DEVICE buttons themselves (on AUDIO only).
The Unifier 5 Press and hold the same button on your old remote control once again. The Unifier’s unique DoubleTap learning technology ensures compatibility with the widest variety of remote controls ever! 6 Once you have taught the button twice, the display will change to either “GOOD” or “FAILED”. If the “GOOD” label appears on top of the display and “SAVED” flashes on the bottom, you were successful.
URC-100 Volume Control Punch Through In most home entertainment systems, the sound volume is only controlled by one device. In some systems, it is the TV speakers that make the sound, so you would use the TV device on the Unifier to raise and lower the volume. In another system, it might be a surround sound receiver and speakers that control the sound, so you would use the Unifier’s AUDIO device to adjust the volume.
The Unifier 2 The Unifier displays SET in the display. SET 3 Press the SHIFT button. The Unifier displays PUNCH in the display. PUNCH 4 Press the Volume Up button. The display confirms by displaying “VOL”. This sets up the group of three buttons (Volume Up, Volume Down and Mute) in one action! VOL 5 Press the Device button for the device that has the Volume control commands you want (i.e.,TV for systems using the TV speakers, AUDIO for systems with surround sound receivers).
URC-100 Advanced Setup After you’ve finished all your basic setup, you can choose to make operation easier by customizing the Unifier just the way you want, using the Advanced Setup features described in this section. Own Two VCR’s? Set Aux to be VCR2 Any device button can be setup for ANY type of component (for example, you can make the AUX device button operate a second VCR).
The Unifier 4 In this step you choose the name of the device you’d like to setup. Use the cursor LEFT or RIGHT buttons to change the flashing name. For Example: I want to setup AUX as my second VCR, so I press the cursor LEFT or RIGHT until AUX appears in the display. LEFT 5 RIGHT Press the MUTE button, then use the left and right buttons to select the type of component you plan to operate with this device button.
URC-100 Editing Device Names The Unifier can display your own custom names for each of the eight device buttons. For example, you can rename AUX to “LIGHTS” or SAT to “DISH”, etc. 1 Press and hold both the device button you want to rename and the ENT button for about three seconds. Note: You have 30 seconds for each step, otherwise the Unifier will time out automatically. Device Buttons ENT Button The Unifier flashes EDIT in the display.
The Unifier 3 4 Change the character by using any of the number keys. Each press of the same number button selects the next character of that number’s group, as shown below. A,B,C,1 D,E,F,2 G,H,I,3 J,K,L,4 M,N,O,5 P,Q,R,6 S,T,U,7 V,W,X,8 Y,Z,9 Once the character you want appears, move to the next space by pressing the RIGHT cursor button. LEFT Cursor button moves blinking character left. RIGHT Cursor button moves blinking character right.
URC-100 Macro Button Setup Imagine turning on your TV, your DVD player and your surround sound receiver by pressing a single button on your Unifier! What would normally take three remotes and three button pushes, the Unifier can accomplish with the press of one button. We call that a “Macro”.
The Unifier 3 Navigate to the device that has a button you want in your macro using the DEVICE buttons. Then press the button with the command you want. Whenever a button is pressed, another Macro step is counted and displayed on the screen. Don’t worry about the number of steps. Each macro button can store up to 50 steps, so you are not likely to run out of steps! Note: You can program delays in between commands by pressing the PAUSE button. Each press adds half a second to the delay.
URC-100 Overview of Erasing You can erase an individual button with a learned command, a macro or a favorite channel. You can erase an entire Device’s learned command or macro buttons. You can also erase ALL your learned commands on all devices or all your macros or favorite channels everywhere. If you really want a fresh start, it is possible to reset everything to the factory default condition.
The Unifier Erasing All Learned Commands in One Device 1 Press and hold both the Device button where the command is stored and the SELECT button for three seconds. Note: You have 30 seconds for each step, otherwise the Unifier will time out automatically.
URC-100 Erasing All Learned Commands in ALL Devices Press and hold both the POWER ON and the STOP button for ten seconds. POWER ON Button STOP Button After the display flashes ERASE ten times you can release the buttons. The display will flash CLEAR and the Unifier will return to normal operating mode. Erasing a Macro 1 Press and hold both the DEVICE button and the MUTE button (to erase Device buttons, use AUDIO and MUTE). Release after SET appears on the display.
The Unifier Erasing All Settings Should you wish to make a clean start, you can reset the Unifier to its factory default settings by pressing and holding both the POWER OFF button and the STOP button for ten seconds. Continue to hold both buttons as the display flashes ERASE nine times, then CLEAR. POWER OFF Button STOP Button The Unifier displays a self testing routine for a few seconds, then returns to normal operating mode.
URC-100 The Optional Expander You can use the Unifier as you would your other remote controls. It transmits very powerful line-of-sight output using infrared light commands (invisible to the naked eye). When you point the Unifier at the components, expect the range to be between 30 and 50 feet. When the remote is not pointed in the general direction of the components, the range will vary (depending on reflective surfaces, lighting, etc.). However, the Unifier also sends radio signals in every direction.
The Unifier The Unifier sends radio signal to the Expander, which is a radio receiver. The Expander converts radio signals to standard infrared commands and sends them out via a built-in front blaster to components in the same cabinet space. Self-adhesive “flashers” (included in the Expander kit) affix to the front panels of your components. The flashers relay infrared commands to components outof-sight of the MRF-100 front blaster. The flashers plug into the MRF-100 rear flasher line output jacks.
URC-100 Pre-Programmed Code Tables The Unifier’s Pre-Programmed code library is classified by category (TV, VCR, AUX, etc.). Each category actually includes many types of components. For example, the SAT category includes satellite receivers and digital video recorders like TiVo and Replay. Within each category, the code numbers are listed in rows by brand (Sony, Panasonic, B & K, etc.). Some brands have more than one three digit code for you to try.
AUDIO - Amps, Preamps and Receivers BRAND ADC ADCOM AIWA AKAI AMC AMEND AMX ANGSTROM ANTHEM ARCAM ATLANTIC TECHNOLOGY AUDIO ACCESS AUDIO ALCHEMY AUDIO DESIGN AUDIO EASE AUDIO FILE AUDIO MATRIX AUDIO SOURCE AUDIO TECHNICA B&K BOSE BRYSTON CARVER CASIO CHIRO CINEMA SOUND CITATION CLARION COMPAQ CURTIS MATHES DENON EIGER ELAN ENLIGHTENED AUDIO ESCIENT FANFARE FISHER FLEXTRONICS FOSGATE FOSGATE AUDIONICS GE GOLDSTAR HAFLER HARMAN KARDON HITACHI IMERGE INKEL INTEGRA JBL JCPENNEY JEFF ROWLAND JENSEN JVC KENWOOD K
AUDIO (continued) - Amps, Preamps and Receivers BRAND KOSS KRELL KYOCERA LEXICON LINN LUXMAN LXI MAGNAVOX MARANTZ MCINTOSH MCS MERIDIAN MITSUBISHI MONDIAL MYRYAD NAD NAKAMICHI NEC NIRO ONKYO OPTIMUS OUTLAW PANASONIC PARASOUND PHAST PHILIPS PIONEER POLKAUDIO PROCEED RCA REALISTIC REQUEST REVOX ROTEL SAMSUNG SANSUI SANYO SCOTT SEARS SHARP SHERWOOD SONY SOUNDESIGN SOUNDMATTERS SOUNDSTREAM SSI SUMO SUNFIRE TAEKWANG TEAC TECHNICS THETA DIGITAL TOSHIBA WARDS YAMAHA ZENITH THREE DIGIT SETUP NUMBERS 216 150 072 37
AUDIO COMMAND LOCATIONS COMMAND Power/Off Power/On Vol+ VolMute Preset+ PresetSCAN BAND,FM/AM MODE DISPLAY OSD CLEAR UP DOWN SELECT LEFT RIGHT 1 2 3 4 5 6 7 8 9 0 10 Enter Mode+ Sub+ Center+ Rear+ ModeSubCenterRearTUNER Input CD Input DVD Input AUX Input Video 3 Input Video 2 Input Video 1 Input TAPE Input HALL THEATER CATHEDRAL PARTY NIGHT CLUB CHURCH JAZZ DISCO OPERA/ARENA SLEEP BUTTON LOCATION OFF ON VOL+ VOLMUTE CH+ CHPREV CH T/V MENU GUIDE INFO EXIT UP DOWN SELECT LEFT RIGHT 1 /SLEEP 2 /6.
AUDIO COMMAND LOCATIONS COMMAND 5/6/7 CH TEST THX DOLBY DIGITAL DTS LOGIC 7 STEREO SURR TAPE2 Input Video 4 Input PHONO Input BASS+ TREBLE+ SURR+ DELAY+ BASSTREBLESURRDELAY- BUTTON LOCATION Press SHIFT first, then press 2/6.7CH button. Press SHIFT first, then press 3/TEST button. Press SHIFT first, then press 4/THX button. Press SHIFT first, then press 5/DD button. Press SHIFT first, then press 6/DTS button. Press SHIFT first, then press 7/LOGIC button. Press SHIFT first, then press 8/ST button.
CD (continued) - CD Players and Changers BRAND JVC KENWOOD KOSS KRELL KYOCERA LOTTE LUXMAN LXI MAGNAVOX MARANTZ MCINTOSH MCS MEMOREX MISSION MITSUBISHI MITSUMI MODULAIRE MONDIAL MYRYAD NAD NAKAMICHI NEC NIKKO NSM ONKYO OPTIMUS PANASONIC PARASOUND PHILIPS PIONEER PROCEED PROTON QUASAR RADIO SHACK RCA REALISTIC ROTEL SAE SANSUI SANYO SCOTT SHARP SHERWOOD SIGNATURE SONY SOUNDESIGN SUMO SYLVANIA SYMPHONIC TAEKWANG TANDY TEAC TECHNICS TECHWOOD THETA DIGITAL TOSHIBA THREE DIGIT SETUP NUMBERS 004 022 136 163 213
CD (continued) - CD Players and Changers BRAND VECTOR RESEARCH VICTOR WARDS YAMAHA YORX THREE DIGIT SETUP NUMBERS 080 004 022 114 124 185 033 024 046 054 186 183 245 182 CD COMMAND LOCATIONS COMMAND BUTTON LOCATION Power/Off Power/On Track+ TrackEJECT RANDOM EDIT PROGRAM DISPLAY CLEAR UP DOWN SELECT LEFT RIGHT Scan- / REW Scan+ / FF Stop Play Pause 1 2 3 4 5 6 7 8 9 0 10 Enter DISC1 DISC2 DISC3 DISK SKIP+ DISC4 DISC5 DISC6 DISK SKIPREPEAT INTRO DISC TIME OFF ON CH+ CHPREV CH T/V MENU GUIDE INFO EXIT UP
DVD - DVD Players and Changers BRAND THREE DIGIT SETUP NUMBERS AIWA ALPINE APEX DIGITAL DENON FUNAI GE GOVIDEO HARMAN KARDON HITACHI INTEGRA JVC KENWOOD KLH KRELL LEXICON LG MAGNAVOX MARANTZ MERIDIAN MITSUBISHI MYRYAD NAD NAKAMICHI ONKYO PANASONIC PHILIPS PIONEER PROCEED PROSCAN RCA SAMSUNG SANSUI SANYO SHARP SONY SYLVANIA SYMPHONIC TATUNG THOMPSON TOSHIBA VENTURER YAMAHA ZENITH 146 098 087 111 115 007 080 143 026 027 137 084 140 101 142 012 151 135 104 148 091 057 074 066 096 083 095 153 017 102 134 088
DVD (continued) - Laser Disc Players BRAND OPTIMUS PANASONIC PHILIPS PIONEER RADIO SHACK RCA REALISTIC RUNCO SANYO SHARP SONY TECHNICS THETA DIGITAL TOSHIBA YAMAHA THREE DIGIT SETUP NUMBERS 049 013 113 032 106 117 121 120 002 049 127 075 152 013 053 110 113 032 152 106 043 129 DVD COMMAND LOCATIONS COMMAND BUTTON LOCATION Power/Off Power/On Skip+ SkipEJECT MENU PROGRAM DISPLAY CLEAR Up Down Select Left Right Scan- / REW Scan+ / FF Stop Play Pause 1 2 3 4 5 6 7 8 9 0 10 Enter REPEAT A/B REPEAT RANDOM RET
DVD COMMAND LOCATIONS COMMAND TIME MEMO AUDIO STEP+ STEPTOP MENU SETUP SEARCH SLOWSLOW+ REC ANGLE SUB ON/OFF SUBTITLE PICTURE SURR ZOOM BUTTON LOCATION SUBCENTERREARPress SHIFT first, then press CH+ Press SHIFT first, then press CHPress SHIFT first, then press MENU Press SHIFT first, then press GUIDE Press SHIFT first, then press INFO Press SHIFT first, then press REW Press SHIFT first, then press FF Press SHIFT first, then press STOP/REC Press SHIFT first, then press 1/SLEEP button.
AUX (continued) - Lighting & Custom Products BRAND 3M AIWA ARCHER AURORA MULTIMEDIA AUTON CELADON CRESTRON DMX DRAPER SCREEN DREAMVISION DWIN EVERQUEST EXTRON FAROUDJA FUJI HUNTERDOUGLAS JERROLD JVC KENWOOD LITE-TOUCH LUTRON MAKITA MINDPATH NILES NSM PIANO DISC PLUS POLKAUDIO RUSSOUND SCIENTIFIC ATLANTA SIMA SOLO ELECTRONICS SOMFY SONY STARCOM TURBOSCAN VELODYNE X-10 XANTECH THREE DIGIT SETUP NUMBERS 152 164 155 220 191 221 213 214 215 216 217 218 156 204 097 080 253 206 151 184 209 219 153 185 185 208 257
AUX COMMAND LOCATIONS COMMAND BUTTON LOCATION 4 5 6 7 8 9 0 10 Enter (B)FF (B)PLAY (B)PLAY BACK DECK A (B)REW (B)STOP (B)REC DECK B (A)REC (A)PLAY BACK DIRECTION A DIRECTION B 4/ THX 5 / DD 6 / DTS 7 / LOGIC 8 / ST 9 / SURR 0 / TAPE 2 +10 / VCR 4 ENT/PH MODE+ SUB+ CENTER+ REAR+ MODESUBCENTERREARPress SHIFT first, then press STOP/REC Press SHIFT first, then press PLAY Press SHIFT first, then press REAR+ Press SHIFT first, then press REAR- SAT - Satellite Receivers BRAND ALPHASTAR AMPLICA BIRDVIEW BSR CAB
SAT (continued) - Satellite Receivers BRAND KATHREIN LEGEND LUTRON LUXOR MACOM MAGNAVOX MARANTZ MEMOREX MITSUBISHI MOTOROLA NEXT LEVEL NEXTWAVE NORSAT PACE PANASONIC PANSAT PAYSAT PERSONAL CABLE PHILIPS PL PRESIDENT PRIMESTAR PROSAT PROSCAN RADIOSHACK RCA REALISTIC SAMSUNG SATELLITE SERVICE SKY SONY STARCAST STAR CHOICE SUPERGUIDE TEECOM TOSHIBA TOWN & COUNTRY UNIDEN VIEWSTAR WINEGARD ZENITH THREE DIGIT SETUP NUMBERS 108 057 132 144 062 059 010 063 064 065 136 152 153 057 136 068 154 148 148 028 124 125 06
SAT COMMAND LOCATIONS COMMAND BUTTON LOCATION Power/Off Power/On Vol+ VolMute Ch+ ChPREV CH INPUT/ANT Menu Guide Info Exit Up Down Select Left Right REW FF STOP PLAY PAUSE 1 2 3 4 5 6 7 8 9 0 10 Enter FAV SEARCH FETCH VIDEO ALT AUDIO PROGRAM HELP INTERACTIVE RECORD OFF ON VOL+ VOLMUTE CH+ CHPREV CH TV/ VCR MENU GUIDE INFO EXIT UP DOWN SELECT LEFT RIGHT REW FF STOP/REC PLAY PAUSE 1 /SLEEP 2 /6.
TV (continued) - Televisions, Projectors, Monitors BRAND THREE DIGIT SETUP NUMBERS AMPRO AMSTRAD ANAM AOC AUDIOVOX BARCO BLAUPUNKT BROKSONIC CAIRN CANDLE CAPEHART CETRONIC CITIZEN CLASSIC CONCERTO CONTEC CORONADO CRAIG CROWN CURTIS MATHES CXC DAEWOO DAYTRON DREAMVISION DWIN DYNASTY DYNATECH EIKI ELECTROHOME EMERSON FISHER FUJITSU FUNAI FUTURETECH GE GOLDSTAR HALL MARK HITACHI INFINITY INFOCUS JBL JCPENNEY JENSEN JVC KEC KENWOOD KLOSS KMC KTV LG LODGENET LOEWE LOGIK LUXMAN LXI MAGNAVOX 167 073 157 183 052
TV (continued) - Televisions, Projectors, Monitors BRAND MARANTZ MATSUI MEMOREX METZ MGA MINERVA MITSUBISHI MTC NAD NEC NIKEI ONKING ONWA OPTONICA ORION PANASONIC PHILCO PHILIPS PIONEER PORTLAND PROSCAN PROTON QUASAR RADIO SHACK RCA REALISTIC ROCTEC RUNCO SAMPO SAMSUNG SANYO SCOTT SEARS SELECO SHARP SIEMENS SIGNATURE SOLE SONY SOUNDESIGN SPECTRICON SSS SUPRE MACY SYLVANIA TANDY TATUNG TECHNICS TECHWOOD TEKNIKA TELEFUNKEN TELERENT TERA TMK TOSHIBA TOTEVISION UNIVERSAL THREE DIGIT SETUP NUMBERS 197 164 184 1
TV (continued) - Televisions, Projectors, Monitors BRAND VIDEO CONCEPTS VIDIKRON VIDTECH WARDS WESTING HOUSE YAMAHA YORK YUPITERU ZENITH ZONDA THREE DIGIT SETUP NUMBERS 146 174 184 188 192 004 004 008 009 019 028 060 061 063 064 072 074 143 164 034 076 197 004 004 043 073 072 095 103 157 183 112 TV COMMAND LOCATIONS COMMAND Power/Off Power/On Vol+ VolMute Ch+ ChPREV CH TV/VCR Menu CH GUIDE DISPLAY CANCEL Up Down Select Left Right 1 2 3 4 5 6 7 8 9 0 10 Enter PIP ON/OFF PIP SWAP PIP POSITION PIP CH+ PIP OF
TV COMMAND LOCATIONS COMMAND AUTO CH CC RESET ADD DELETE SLEEP ASPECT RGB Input COMPONENT MODE WIDE/SIZE S-VIDEO Input VIDEO1 Input VIDEO2 Input BUTTON LOCATION Press SHIFT first, then press GUIDE Press SHIFT first, then press INFO Press SHIFT first, then press EXIT Press SHIFT first, then press UP Press SHIFT first, then press DOWN Press SHIFT first, then press 1 /SLEEP Press SHIFT first, then press 2 /6.
VCR (continued) - Video Cassette Recorders BRAND MATSUI MEI MEMOREX MGA MINOLTA MITSUBISHI MTC MULTITECH NEC NORDMENDE OPTONICA ORION PANASONIC PENTAX PHILCO PHILIPS PILOT PIONEER PORTLAND PULSAR QUARTZ QUASAR RADIO SHACK RCA REALISTIC RICO RUNCO SALORA SAMSUNG SANSUI SANYO SCOTT SEARS SHARP SHINTOM SIGNATURE SONY SOUNDESIGN STS SYLVANIA SYMPHONIC TANDY TATUNG TEAC TECHNICS TEKNIKA THOMAS TMK TOSHIBA TOTEVISION UNITECH VECTOR RESEARCH VICTOR VIDEO CONCEPTS VIDEOSONIC WARDS THREE DIGIT SETUP NUMBERS 027 030
VCR (continued) - Video Cassette Recorders BRAND YAMAHA ZENITH THREE DIGIT SETUP NUMBERS 012 034 039 043 072 080 056 048 101 034 058 VCR COMMAND LOCATIONS COMMAND Power/Off Power/On Ch+ ChPREV CH VCR/TV Menu GUIDE DISPLAY CANCEL UP DOWN SELECT LEFT RIGHT Rew FF Stop Play Pause 1 2 3 4 5 6 7 8 9 0 10 SLOW SLOW+ TRK+ PROGRAM AUTO TRK SLOWTRKRESET INPUT Record X2 PLAY EJECT SLEEP / TIMER CLOCK/COUNT RESET AUTO CH F.
VCR COMMAND LOCATIONS COMMAND INDEX ADD DELETE TAPE SPEED BUTTON LOCATION Press SHIFT first, then press 7/LOGIC button. Press SHIFT first, then press 8/ST button. Press SHIFT first, then press 9/SURR button. Press SHIFT first, then press 0/TAPE2 button.
CBL (continued) - Cable TV Tuner/Descrambler BRAND THREE DIGIT SETUP NUMBERS SCIENTIFIC ATLANTA SIGNAL SIGNATURE SL MARX SONY SPRUCER STARCOM STARGATE TADIRAN TIMELESS TIME WARNER TOCOM TOSHIBA UNIKA UNITED CABLE UNIVERSAL VIEWSTAR ZENITH 003 011 041 042 043 045 046 030 103 030 096 108 047 078 002 004 008 009 008 030 097 104 030 030 043 039 040 056 052 007 014 004 053 005 007 014 032 035 012 015 018 086 087 088 089 052 060 093 100 CABLE COMMAND LOCATIONS COMMAND BUTTON LOCATION Power/Off Power/On Vol+
CABLE COMMAND LOCATIONS COMMAND 0 10 Enter/MUSIC FAV DAY+ PAGE+ HELP LOCK / PPV DAYPAGESETTING RECORD A B C BUTTON LOCATION 0 / TAPE 2 +10 / VCR 4 ENTER / PH MODE+ SUB+ CENTER+ REAR+ MODESUBCENTERREARPress SHIFT first, then press STOP/REC. Press SHIFT first, then press 1/SLEEP button. Press SHIFT first, then press 2/6.7CH button. Press SHIFT first, then press 3/TEST button.
URC-100 Frequently Asked Questions Why does the display change whenever you press the buttons at the top of the remote? The Unifier is actually eight remote controls in one. The LCD display shows you which of your components it is currently set to control. When you press one of the eight DEVICE buttons (those labeled AUDIO, CD, DVD, etc.), the Unifier changes the functions of all of other buttons to control that component.
The Unifier time, the Unifier enables you to “record” all of them to play back with one button push. For more information on how and why you should program macros, watch the Quick Setup DVD tutorial or read pages 17-18. If the batteries run out, will I lose my settings? No. The Unifier stores all of your settings in non-volatile FLASH memory. You could remove the batteries for months, replace them at your convenience and the Unifier would still remember your settings.
URC-100 Warranty The URC-100 is covered against any manufacturers defects or workmanship for a period of one year from the date of purchase if purchased from an authorized Universal Remote Control dealer. Units purchased from online auction sites or other unauthorized resellers have no warranty. This warranty does not cover the following items: - Damage from misuse, neglect, or acts of nature. - Products that have been modified or incorporated into other products.
OCE-0023A Rev.
