Owner's Manual TRC-1280 Network Remote
TRC-1280 TOUCH SCREEN This remote control was Custom Programmed for you by: For questions about your Custom Programming call: Custom Programming of a complex home theater and/or a multi-room system is one of the most challenging tasks within an audio/video installation. It involves an intimate knowledge of how the components interact and exact details on the proper sequences of control.
TRC-1280 TOUCH SCREEN Congratulations! 1 Using the TRC-1280 2 Connecting the Battery Pack 3 Using the Charging Base 3 Two-Way via WiFi 3 Displaying the Settings Screen 4 Sleep Settings 5 Wireless Network Settings 5 Brightness 5 System 5 Button Light 6 Power 6 Calibration 6 Date and Time 6 Sound & Vibration 7 Pickup 7 Factory Default 7 Exit 7 Maintaining Your TRC-1280 8 Specifications 8 Limited Warranty Statement 9 End User Agreement 11 Precautions and Information
TRC-1280 TOUCH SCREEN Congratulations! Thank you for purchasing the Total Control TRC-1280 universal remote control. This unit can control every connected device in your home using the Total Control Advanced System Controller. You can also control devices located in different rooms via Wi-Fi. Controlling your home is simple with the TRC-1280 remote. Two-way Instant-Wi-Fi controller with dazzling 2.
TRC-1280 TOUCH SCREEN Using the TRC-1280 The TRC-1280's Main Menu pages display the activities and devices in your system. Press the Main page button to see what your choices are. Large systems may have more than one page. Press either of the Page buttons to see further options. Gently press any screen button with your finger to select an activity or a device. The screen will change to display the buttons you need for that activity/device.
TRC-1280 TOUCH SCREEN Connecting the Battery Pack Unlock the rear cover by pressing down on the spring lock at the top of the cover. Remove the cover. For shipment from the factory, the battery is left out of the TRC-1280. Place the battery into the battery compartment, making sure you align the contacts on the battery to the contacts on the TRC-1280. The battery will snap into place when aligned properly. Replace the cover and snap it into place.
TRC-1280 TOUCH SCREEN Displaying the Settings Screen You can enter the Settings menu by pressing and holding the MAIN and OK button for three seconds. Once there, if you do not press any button on the Settings screen, the TRC-1280 will timeout after 60 seconds and return to the previous setting or Main screen. There are two pages of Settings screens. To access the other page, press either of the Page buttons. To select a setting, press the buton on the LCD screen.
TRC-1280 TOUCH SCREEN Sleep Settings Wi-Fi and backlighting can be separately adjusted to conserve battery life. Note that when the backlight is set to turn off, the remote is not connected to the network. Picking up or waking the TRC-1280 will reconnect it to the Wi-Fi network. Wireless Network Settings WARNING! Only use this button when instructed to by Technical Support. The screen displays network information about your TRC-1280 and the wireless network it is connected to.
TRC-1280 TOUCH SCREEN Button Light You can adjust the brightness of the LEDs that backlight the buttons of the TRC-1280. Move the slider left to dim the backlighting and move it right to brighten the backlighting. Power You can display the remaining charge by selecting Power. You can also adjust when the Low Battery warning screen will appear. Calibration To calibrate button presses, adjust the onscreen “tap” location with a pen top or PDA stylus.
TRC-1280 TOUCH SCREEN Sound & Vibration Adjust the volume and vibration levels by touching and dragging the slider to your desired Min/Max levels. Pickup You can set your TRC-1280 to only turn on when touched, or every time you move it. Simply select On or Off. Also you can adjust the pickup sensitivity with the slide bar. Factory Default WARNING! Only use this button when instructed to by Technical Support. It resets the memory of the TRC-1280 to the factory settings.
TRC-1280 TOUCH SCREEN Maintaining Your TRC-1280 Be careful not to scratch the touch screen, only use your finger to tap the LCD touch screen or use a plastic pen top or PDA stylus. Never use a real pen, pencil or any other sharp object on the screen. Keep it away from extreme cold or heat. The TRC-1280 is not waterproof. Do not use it in any location that is damp or wet. If you spill water on it, take out the battery pack and let the TRC-1280 dry for 48 hours before you try powering it up again.
TRC-1280 TOUCH SCREEN Limited Warranty Statement 1. Limited Warranty and Disclaimers Universal Remote Control, Inc. (“URC”) warrants that the URC equipment shall be free from defects in material and workmanship under normal usage for one (1) year from purchase when such is purchased from URC. This limited warranty is valid only in the United States of America. URC warrants that the software will substantially conform in any material respect to its functional specifications at the time of delivery.
TRC-1280 TOUCH SCREEN THE GENERALITY OF THE OTHER PROVISIONS HEREIN, WARRANTY DOES NOT COVER: (I) DAMAGE FROM MISUSE, NEGLECT OR ACTS OR NATURE, (II) MODIFICATIONS, (III) INTEGRATION WITH THIRD PARTY CONTENT (IV) BEYOND THE WARRANTY PERIOD AND/ OR FAILURE TO FOLLOW URC WARRANTY CLAIM PROCEDURE.
TRC-1280 TOUCH SCREEN programmable remotes or any of our Total Control® whole-house equipment online means buying equipment that does not have a URC’s limited warranty. Such equipment is not eligible for URC tech support or software support, either. 2. URC’S Limitations of Liability IN NO EVENT SHALL URC BE LIABLE FOR INDIRECT, SPECIAL, INCIDENTAL, EXEMPLARY, PUNITIVE OR CONSEQUENTIAL DAMAGES OF ANY KIND OR LOSS OF PROFITS OR BUSINESS OPPORTUNITY, EVEN IF URC IS ADVISED OF THE POSSIBILITY OF SUCH DAMAGES.
TRC-1280 TOUCH SCREEN Precautions and Information Concerning Rechargeable Lithium Polymer Batteries u If you will not be using your remote control for an extended period of time, be sure to remove the battery u Do not attempt to disassemble, alter or apply heat to the battery. u Use care to avoid dropping the battery or subjecting it to severe impact that could damage the case. u The battery should not be immersed in water. u Risk of explosion if battery is replaced by an incorrect type.
TRC-1280 TOUCH SCREEN Federal Communication Commission Interference Statement This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation.
TRC-1280 TOUCH SCREEN Regulatory Information to the user n CE conformity Notice Products with “CE” marking comply with the R&TTE Directive 1995/5/EC, EMC Directive 2004/108/EC and Low Voltage Directive 2006/95/EEC issued by the commission of the European Community.
TRC-1280 TOUCH SCREEN Declaration of Conformity Company Name : Universal Remote Control Inc. Company Address : Contact Information : 500 Mamaroneck Avenue, Harrison, NY 10528, U.S.A www.universalremote.
500 Mamaroneck Avenue, Harrison, NY 10528 Phone: (914) 835-4484 Fax: (914) 835-4532 www.universalremote.
