Total Control Thermo Control for THZ-100 Thermostat User’s Manual
Thermo Control for THZ-100 Thermostat InTrodUCTIon ..........................................................................................1 BenefITs ..................................................................................................1 1.0 InsTallaTIon InsTrUCTIons ....................................................................2 1.1 download and InsTallaTIon ................................................................2 1.2 openIng THe THerMo ConTrol sofTware .......................
Thermo Control for THZ-100 Thermostat Introduction Congratulations on your purchase of this THZ-100 Thermostat from UrC. enjoy the full functionality of a stand-alone thermostat coupled with the ability, when used with a Total Control system, to be operated from any user interface in the system.
Thermo Control for THZ-100 Thermostat 1.0 Installation Instructions 1.1 download and Installation 1. visit www.universalremote.com. from the Support tab, press Download. 2. select the Total Control Thermo Control software for the THZ-100 Thermostat (ThermoCtrl.exe) to download. 3. follow the on-screen prompts to download and install the software. 1.2 opening the Thermo Control software To open the newly installed program, press the Start button and click Thermo Control.
Thermo Control for THZ-100 Thermostat 2.0 programming the Thermo Control THZ-100 Thermostat software 2.1 Using Thermo Control as the software opens, a small window titled, “Select a Device” prompts you to do just that. 1. Choose your installed MrX advanced network system Controller (Base station), from the item list. (ex. MrX-10) Note: Now that you have selected your base station, the next time you open the software it will remember your selection.
Thermo Control for THZ-100 Thermostat A B C F D E Select Thermostat: lists each THZ-100 installed in your home. select the thermostat that you would like to edit from the drop-down box. A B Temperature Scale: select the preferred scale; fahrenheit or Celsius. • Fahrenheit Temperature scale that defines the freezing point at 32 degrees and the boiling point at 212 degrees fahrenheit. select the Fahrenheit option to choose this scale.
Thermo Control for THZ-100 Thermostat Thermostat scheduling was designed to adjust the temperature according to a series of programmed settings that take effect at different times of the day. D Edit Programming This option allows you to edit days by week, weekends, every day, selected days or special day (vacation Mode). Select Days For Editing 1. Selected Days: Check the days you would like to edit 2. Week Days: Check this option to group weekdays 3. Weekend Days: Check this option to group weekends 4.
Thermo Control for THZ-100 Thermostat Current Schedule Programming This option provides a snapshot of your current schedule separated per weekday into four periods: Morning, day, evening and night. F note: If you don’t like the temperature for a certain day or time period, you can quickly change it. 1. Select or highlight the day you would like to edit. 2. Make your changes within the Edit Programming and the Select Periods section. 3. once all your changes are made, press Apply to Schedule.
Thermo Control for THZ-100 Thermostat 3.0 download to your THZ-100 Thermostat once you have finished your adjustments, you will need to download the changes to the thermostat. 1. select File then Save to Device. The download instantly begins. 2. when the download reaches 100% a Download Success window opens. press Ok. Note: Keep in mind, if the thermostat is currently in use, the download will be delayed until the user is done adjusting the temperature.
Thermo Control for THZ-100 Thermostat advanced settings for advanCed Users These settings should only Be Used By qUalIfIed IndIvIdUals. Improper settings may cause malfunction and damage to the climate control systems. 1. Click on View, then Show Advanced Settings. 2. a window opens to warn you of the potential damage an unqualified programmer/user may cause. 3. If yoU are qUalIfIed, press View Settings. 4. The advanced settings screen opens. HVAC System Type: shows three different HvaC system Types.
Thermo Control for THZ-100 Thermostat Button Lockout allows you to add a 4 digit lockout code when enabled. locking the keypad is a good idea to avoid unwanted people from controlling the thermostat. Check the Use Pass-Code Lockout to enable the lockout feature. Set Point Limiter This feature allows you to set a heat limit and a cool limit by manually entering a limit point for both. This prevents users from making temperature adjustments outside of the limit range. 1.
500 Mamaroneck Avenue Harrison, NY 10528 Phone: (914) 835-4484 Fax: (914) 835-4532 www.universalremote.
