Owner’s Manual DMS-100 Single Zone Amplifier
DMS-100 Owner’s Manual ©2010-2013 Universal Remote Control, Inc. The information in this Owner’s Manual is copyright protected. No part of this manual may be copied or reproduced in any form without prior written consent from Universal Remote Control, Inc. UNIVERSAL REMOTE CONTROL, INC. SHALL NOT BE LIABLE FOR OPERATIONAL, TECHNICAL OR EDITORIAL ERRORS/OMISSIONS MADE IN THIS MANUAL. The information in this Owner’s Manual may be subject to change without prior notice.
TABLE OF CONTENTS Congratulations! 1 Features and Benefits 2 Parts Guide 2 Front Panel Description 3 System Features 4 Rear Panel Description 5 System Features 6 Important Safety Instructions 7 Federal Communication Commission 9 Interference Statement 9 Limited Warranty Statement 10 End User Agreement 12 Specifications 13 System Configuration for Internal LAN Networks 14 Europe Certification of Conformity 15 Page 1
DMS-100 SINGLE ZONE AMPLIFIER Congratulations! You’ve purchased the finest music distribution system available today. The DMS-100 is a native to the network, CD quality digital music distribution system with an available range of keypads and remote controls that not only fully control your music but control all of your other audio video components. The DMS-100 distributes music to your speakers and other DMS components in the system.
DMS-100 SINGLE ZONE AMPLIFIER Features and Benefits • One audio input streams to other Total Control amplifiers. • Preamp output for connection to local amplifier. • Scalable solution; install as an additional zone with a DMS-1200 system, or install multiple DMS-100s to create customized multi-zone system. • 50 Watts per channel amplifier for speakers. • Can be programmed off premises via the internet and MRX-10.
DMS-100 SINGLE ZONE AMPLIFIER Front Panel Description Power and LAN LEDs LEDs indicate that the DMS-100 is connected to power and to the local area network. Automatic Power Off The DMS-100 is powered off and is in an automatic stand by state when no zones are active. Reset Button The front panel reset button offers the end user a quick way to reconnect the DMS-100 to the local area network.
DMS-100 SINGLE ZONE AMPLIFIER System Features Pristine Audio Quality Unlike other digital music systems, the DMS system streams all music uncompressed at pure CD quality levels. You enjoy all the detail of your original source. Room Linking Any room can be linked with any other room to listen to the same source. This makes it easy for you to entertain by simply linking all the rooms your guests will be in and controlling the music from any remote or keypad.
DMS-100 SINGLE ZONE AMPLIFIER Rear Panel Description 100V-220V Power Connection The IEC power socket enables either UL/CSA approved 110V power cords or CE approved 220V power cables to be used with the DMS-100. The internal power supply automatically switches from 100V to 240V. Network Connection A 10/100 LAN connection ensures that the DMS-100 will receive all network streams from other DMS or SNP sources.
DMS-100 SINGLE ZONE AMPLIFIER System Features Analog Audio Input Connect a music source to the DMS-100 to listen locally to an AV receiver. Preamp Zone The preamp zone enables use of external power amplifiers for a room with a need for more or less power than 50 watts per channel. Speakers The DMS-100 internal amplifier powers a pair of 8 ohm speakers with 50 watts per speaker. The speakers can deliver output from any DMS source.
IMPORTANT SAFETY INSTRUCTIONS Important Safety Instructions This unit shall be connected to a mains socket outlet with a protective grounded connection or equivalent. CAUTION: To completely disconnect this product from the mains, disconnect the plug from the wall socket outlet. The mains plug is used to completely interrupt the power supply to the unit and must be within easy access by the user. CAUTION: These servicing instructions are for use by qualified service personnel only.
IMPORTANT SAFETY INSTRUCTIONS Important Safety Instructions 1. 2. 3. 4. 5. 6. 7. 8. 9. 10. 11. 12. 13. 14. 15. Read these instructions. Keep these instructions. Heed all warnings. Follow all instructions. In the event of malfunction, un plug lmmediately. Do not use this apparatus near water. Clean only with dry cloth. Do not block any ventilation openings. Install in accordance with the manufacturer’s instructions.
DMS-100 SINGLE ZONE AMPLIFIER Federal Communication Commission Interference Statement This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation.
WARRANTY Limited Warranty Statement 1. Limited Warranty and Disclaimers Universal Remote Control, Inc. (“URC”) warrants that the URC equipment shall be free from defects in material and workmanship under normal usage for one (1) year from purchase when such is purchased from URC. This limited warranty is valid only in the United States of America. URC warrants that the software will substantially conform in any material respect to its functional specifications at the time of delivery.
WARRANTY SKILL AND CARE, OR OUTCOME OR RESULTS. WITHOUT IN ANY WAY LIMITING THE GENERALITY OF THE OTHER PROVISIONS HEREIN, WARRANTY DOES NOT COVER: (I) DAMAGE FROM MISUSE, NEGLECT OR ACTS OR NATURE, (II) MODIFICATIONS, (III) INTEGRATION WITH THIRD PARTY CONTENT (IV) BEYOND THE WARRANTY PERIOD AND/ OR FAILURE TO FOLLOW URC WARRANTY CLAIM PROCEDURE.
WARRANTY With the exception of URC’s IR-only, broad-based consumer remotes, none of URC’s PC programmable remotes or any of our Total Control® whole-house equipment are authorized for online internet sales. Buying URC’s PC programmable remotes or any of our Total Control® whole-house equipment online means buying equipment that does not have a URC’s limited warranty. Such equipment is not eligible for URC tech support or software support, either. 2.
SPECIFICATIONS Specifications Network One 10/100 Ethernet port (Indicator Two LED) IR One Way & IP Two Way Control: Yes Indicators: One Power Blue LED - Blink when resetting/One Network Blue LED indicator Zones of Stereo Audio: One (preamp and speaker output are linked) Rated Wattage per Channel: 50 watts per channel at 8 ohms, stable to 4 ohms Automatic Low Volume Loudness Compensation: Installer configured for type and size of audio zone Installer Configured EQ: Bass Boost, Treble Boost, 5-B
DMS-100 SYSTEM CONFIGURATION System Configuration for Internal LAN Network Cable Modem Internet WiFi Router MFS-8 DMS-100 PC Follow the steps below to connect a DMS-100 to a LAN network. 1. Connect the Internet to the coaxial CABLE port in the rear of the cable modem. 2. Plug in a RJ-45 ethernet connector cable via the Ethernet port of the cable modem to the WAN port of the Router. 3.
EUROPE CERTIFICATE OF CONFORMITY Europe Certificate Of Conformity Universal Remote Control, Inc. declares that this product complies with the requirements CE/LVD (Low Voltage Directive, 2006/95/EC).
Page 16
500 Mamaroneck Avenue, Harrison, NY 10528 Phone: (914) 835-4484 Fax: (914) 835-4532 www.universalremote.
