Installation guide

ELECTRIC COOKTOP INSTALLATION INSTRUCTIONS
® Install Grease Filter and Grate Carefully place the vent grate onto the opening. Place
the side of the vent marked FRONT towards the front
of the opening. The vent grate will only fit one way,
* Place the grease filter diagonally through the vent DO NOT force into the opening.
DO NOT operate the vent without the grease filter in place.
opening.
.
Match
Curve
on
Vent Grate with
Curve in Glass
* Make sure it rests, at an angle, on the supports in the
“FRONT” Mark
vent opening.
Grease Filter
Al
A
“i
“AH
Mir
LEE PHS
rR RO
HR
SOM
RO THM
CARRIE
emt
DHMH
BOOKA
LORI TLE
NT,
PAIR
NM
Vent Chamber
Figure 25 — INSTALL THE VENT GRATE
Checking Operation
Refer to the Use and Care Guide for operation.
Vivi itey§| DO NOT touch cooktop glass or
elements. They may be hot enough to burn you.
Model and Serial Number Location
The serial plate is located under the cooktop (see Fig. 3).
When ordering parts for or making inquiries about your
Grease Filter cooktop, always be sure to include the model and serial
numbers from the serial plate on your cooktop.
Before You Call for Service
Read the Before You Call for Service Checklist and
operating instructions in your Use and Care Guide.
It may save you time and expense. The list includes
common occurrences that are not the result of defective
workmanship or materials in this appliance.
Figure 24 —
GREASE FILTER LOCATION
Refer to your Use and Care Guide for Sears service
phone numbers, or call 1-800-4-MY-HOME®.
12