User guide

Link to Table of Contents
User Guide
225
ULS Reference Guide Book
Proceed to page 229 “Laser Cartridge Installation.”
With the assistance of three or four other people, place the system on top of the cart and 4.
loosely install the provided screws that attach the machine to the cart. Be careful not to
pinch your ngers.
Open front door all the way to ensure that it does not come in contact with the cart legs. If the door should 5.
come in contact with the cart legs, gently pull the cart legs apart to ensure there is non-contact between
the door and the cart legs. Securely tighten all the screws and re-check.
Attach your exhaust system’s wire-reinforced rubber tubing to the exhaust port at the rear of the laser 6.
system and secure with a hose clamp.
Place the VersaLASER system in the desired location for operation.7.