Specifications

SAFETY PRECAUTIONS
Easy-Laser® is a laser instrument in laser class II
with an output power less than 1 mW, which only
requires the following safety precautions:
Never stare directly into the laser beam
Never aim the laser beam at anyone else’s eyes.
NOTE! Opening the laser units can result in
hazardous radiation, and will in validate the
manufacturer warranty.
!
DISCLAIMER
Damalini AB and our authorized dealers will take
no responsibility for damage to machines and
plant as a result of the use of Easy-Laser®
measurement and alignment systems.
Even though great efforts are made to make the
information in this manual free from errors, and to
make the information complete for the user, there
could be things we have missed, because of the
large amount of information. As a result of this, we
might change and correct these things in later
issues without further information. Changes to the
Easy-Laser® equipment may also affect the
accuracy of the information.
Warning!
If starting the machine to be measured would result
in injuries, the possibility to unintentionally start it
must be disabled before mounting the equipment,
for example by locking the switch in the off position
or removing the fuses.
These safety precautions should remain in place
until the measurement equipment has been remo-
ved from the machine.
NOTE! The system should not be used in explosive
risk areas.