Specifications

PRINTER KYOLINE BAT
Thermal printer for Easy-Laser® systems.
When the power is turned on, the printer performs many
internal tests and initializations. When the tests are
completed, the printing head moves. The indicator lights up,
and the printer is then ready for use.
The red indicator shows the state of the printer:
Constant light – printer ready
Flashing slow, short lighting – memory full, wait to launch the
next printing
Flashing slow, short extinction – Battery charging in progress
Flashing fast – printing head jammed; turn the printer off,
remove the paper and replace it correctly.
No light – printer needs to be charged. (First check that
the printer is turned on.)
TECHNICAL SPECIFICATIONS
Interface Serial RS232C, 9600 bauds
Power supply Battery.
Operating conditions 5–35° C, 20–70% humidity
Dimensions 165x135x50 mm
Weight 560g [19 oz], with a 20 m paper roll
Roll paper Thermal black printing,
Part No.03-0041
width 112 mm, length 20 m
diameter 42 mm.
Spare printer cable Part No. 03-0241
Press and hold the round
button to advance the paper.
A36
When replacing the paper roll, cut the paper straight.