Specifications

LINEBORE SYSTEM: coordinate hub
A
A31
Coordinate hub with three arms and magnets
for mounting and parallel movement (adjustment
to centre) of the laser transmitter D75.
Coordinate hub with laser and arms mounted.
TECHNICAL SPECIFICATIONS
Laser adjustment ±5 mm [3/16”] in 2 axis
Dimensions Ø99x62 mm [3 7/8”x2 3/8”]
Housing material Aluminum
Coordinate table weight 1 kg [2.2 lbs]
Arms for diameters Ø100–500 mm [4–20”]
Weight 1.2 kg [2.6 lbs]
Vertical
parallel movement and
angular adjustment.
Horizontal
angular adjustment and
parallel movement.
When mounting the laser on the coordinate hub,
screw the horizontal adjustment as far out as
possible so that the two fastening screws for the
laser can be reached.
Horizontal adjustment
Measure and adjust the arms to the radius. Adjust the third
arm when the unit is in position in the measuring object.
Centre support
Fastening screws
Placing the laser in a bearing journal:
Alt. 1
Alt. 2. One of the arms mounted
downwards when the upper bearing
journal part is removed.
D75