Specifications

SPINDLE LASER D146
A
A11
Laser aperture
Battery cap
(use a coin to lock)
Alt. 1 Alt. 2
Laser adjustment
screws
Laser
aperture
On / Off
Mounting plate and
clamping pin (changeable)
made of stainless steel.
Laser transmitter D146 for measurement of
spindle direction and straightness. Attached to a
spindle it will project concentric circles when the
spindle is rotated. The centres of those circles are
the same as for the pointing direction of the
spindle. This allows measurement of the pointing
direction of the spindle relative to the movement
of the detector, as well as straightness along the
spindle direction. The clamping pin can be
mounted at both ends of the transmitter (Alt. 1 and
Alt. 2). Pins of different diameters can be used.
(See page B20 for more information on D146.)