Specifications

GETTING STARTED
10. After the measurement is finished you can do
the following; save the result in the display unit, if
you have a printer; connect this and make a
printout (see chapter B) or connect the display
unit to a PC and transmit the data (in this case
you first have to install the EasyLink™ software,
see chapter B.)
These are the basics for getting started with the
system. Easy-Laser® is easy to use, but as with
most things, practical training and experience are
needed to correctly and effectively carry out the
measurements.
Good luck, and thanks for chosing Easy-Laser®
measurement and alignment systems!