Specifications
GETTING STARTED
Manual
This manual describes in order:
The hardware parts:
Technical specifications and functions.
Handling the display unit:
Settings, button choices and measurement data handling.
Handling the measurement programs:
Measurement procedures step-by-step.
Measurement applications:
More examples of applications.
The basics of measurement and aligning:
The basics, technical terms etc.
Appendix:
Tolerances, Conversion tables, Problem solver.
If you are unfamiliar with measurement and
alignment, we suggest that you first read the
chapter E- Measurement basics... before you start
using the system, and then go on from chapter A.
NOTE! In chapter C-Measurement programs
each step describes which button to press to
continue the measurement. Also there are
optional choices between brackets, for example:
[ Backstep ]
Continued
➥➥
➥➥
➥
Regarding the On/Off-button :
When you are using a measurement program and
press the On/Off-button you will be directed to the
program menu again. You can now choose to
start another program and do another
measurement. If you will not use the display unit in
this mode it will automatically be shut down after
10 minutes. If you instead press the On/Off-button
again the display unit will be shut down
immediately.
(The display unit also has a general Auto-Off
function, see page B2.)