Specifications

MEASUREMENT PROGRAMS
X
X
X
X
X
X
X
X
X
X
X
BTA digital - For measurement and alignment of pulleys.
Values - This program displays the values from the detector in live mode, similar
to measurement with dial indicators. The values can be zeroed and halved. Up
to four units can be connected in series and can be zeroed individually.
Vibrometer - Shows vibration level in ”mm/s” or ”inch/s” and bearing condition
value in ”g”. The measurement complies with vibrations standard ISO10816-3.
X
X
Straightness - For measurement of straightness on machine
foundations, shafts, bearing journals etc. Handles up to 150 measurement
points with two arbitrary zero points.
Continued
D525
D600
D630
D650
D660
D670
D800
D505D450
X
Squareness - For measurement of squareness in machinery and plant.
Parallelism - For measuring between rolls, machine sides etc. Handles
up to 150 rolls or other objects. Baseline or roll can be chosen as
reference. Each measurement object is given a specific name.
Flatness - Program for measurement of flatness/twist, for example on
machine foundations, machine tables etc. Handles up to 300 measurement
points with three zero points.
Straightness PLUS - Versatile program with advanced functions. Measure-
ment points can be added, deleted or remeasured anytime during the measure-
ment. The reference line can be offset set. For use as described above.
PlumbLine - With this program you measure plumbline and straightness
on turbine and generator shafts, for example.
Spindle - For measurement of centerline direction of machine spindles on
machine tools, drilling machines etc.
Parallelism PLUS - Versatile program with advanced functions. Measurement
objects can be added, deleted or remeasured anytime during the measurement.
Includes baseline measurement function. For use as described above.