Specifications
MEASUREMENT PROGRAMS
Measurement programs configurations
These pages describe which programs and functions the Display unit D279
has for the different measurement systems. There is also a brief description of
each program.
D525
D600
D630
D650
D660
D670
D800
XX
XX
XX
XX
XX
X
X
X
XX
XX
Offset and Angle - This program displays the offset and the angular
misalignment between e.g. two shafts. Shows values from both 1-axis and 2-
axis measurement units. Also suitable for dynamic measurements.
XX
X
X
X
D505
X
X
D450
EasyTurn
TM
- For shaft alignment of horizontal machines.
Requires only 20° between measurement points.
Horizontal - For shaft alignment of horizontal machines with the 9-12-3 method.
Softfoot - With this program you can check that the machine is standing on all
feet. Displays which foot to correct.
Vertical - For measurement of vertical and flange mounted machines.
Cardan - Shows the angular misalignment and the adjustment value for
offset mounted machines.
Tolerance check - Checks the offset and angle values towards selected
tolerance. Shows graphically when the alignment is within tolerance. Sub function.
Measurement Value Filter - Air with varying temperature may influence the
direction of the laser beam. The filter function produces stable readings also for
these conditions. Sub function in all programs except BTA Digital and Vibrometer.
Machine train - For the alignment of two to ten machines in a row (nine
couplings). Shows the measurement values live during the alignment.
Thermal growth compensation - Compensates for difference in thermal
growth between the machines. Works as a sub function in the Horizontal,
EasyTurn™ and Machine train program.
RefLock™ - Any two feet can be selected as references (locked).
Works as a sub function in the Machine train program.
X
X
X