User guide

Maintenance Schedule

We recommend the following schedule:

As necessary

• Clean engraving table

• Clean main enclosure

• Clean top door window

Every 8 hours of engraving

• Clean X-Axis and Y-Axis bearings

• Clean X-Axis and Y-Axis rails and bearing

tracks

• Clean X-Axis belt

• Check beam window, #2 mirror, #3 mirror

and Focus lens for debris. Clean ONLY if

dirty.

Every month

• Clean cooling fan filters

• Clean Z-Axis lead screws with white lithium

grease

• Check for X-Axis and Y-Axis belt wear.

Replace as necessary.

• Check and/or clean X-Axis and Y-Axis drive

gears

• Check for X-Axis and Y-

xis bearing wear.

Replace as necessary.

• Inspect system for loose screws and

mechanical parts. Tighten as necessary.

Every 6 months

• Clean exhaust plenum

Note: If you have any questions about maintaining the laser system, please contact the ULS Customer

Service Team.