Specifications

MELAMINE - STANDARD ENGRAVING
TYPE POWER SPEED PPI PASS DEPTH
RASTER ENGRAVING 100 70 500 1 .015”
COMMENTS: Engrave unmasked.
TYPE POWER SPEED PPI PASS DEPTH
DEEP RASTER ENGRAVING 100 50 500 1 .020”
COMMENTS: Engrave unmasked.
TYPE POWER SPEED PPI PASS DEPTH
VECTOR ENGRAVING 20 4.0 500 1 .010”
COMMENTS: Engrave unmasked.
ADDITIONAL COMMENTS
ngraving melamine is very similar to engraving regular wood with the added benefit of E
a consistent surface finish and uniform base material composition. Unlike regular wood
which has grain patterns and density variations, melamine when laser engraved
produces a flat and even engraved area. This characteristic gives this material superior
engraving and paint filling qualities. Masking can be used if desired but it is just as easy
to spray the engraved area with water and wipe down with a chamois cloth to remove
the smoke residue. Since the top surface material is consistent in texture and color,
engraving photographs or highly detailed images produces exceptional results. Refer to
the next example on engraving photographs and/or ClipArt.
75