Specifications
MARBLE
TYPE POWER SPEED PPI PASS DEPTH
RASTER ENGRAVING 100 100 500 1 .003”
Too much laser power by running too slowly will
ngrave too deep and discolor.
PO R SPEED PASS DEPTH
COMMENTS: Engrave unmasked.
e
TYPE WE PPI
VECTOR ENGRAVING 20 4.0 500 1 .003”
COMMENTS: Engrave unmasked.
ADDITIONAL COMMENTS
Most marble and polished stones will turn white when engraved. Masking is not
ecessary and light engraving works out better than heavy and deep engraving.
hly detailed image to appear washed out. The
gh to turn the marble white and provide a good
ontrast. Too much power can also cause the material to discolor and turn brown as if it
ere burned. Photographs look great when engraved on marble, especially darker
arbles wher hiteness of the engraving really stands out. Avoid using marble
that is very textured looking. The as the ls of ra
ones. Marble can also be paint filled by
e surrounding
reas.
n
Engraving deeply will cause a hig
bjective is to engrave deep enouo
c
w
m e the w
texture w hes out detai the eng ving. Try
to use uniformly colored marble and related st
using a wax based paint. Rub the paint on with a fingertip, let dry and then buff with a
soft cloth. The paint will only adhere to the engraved surface and not th
a
73