Specifications

ACRYLIC - MIRRORED

TYPE POWER SPEED PPI PASS DEPTH

LIGHT RASTER ENGRAVING 30 100 500 1 .003”

COMMENTS: Engrave unmasked and on the backside in reverse text. Engraving on

the front side of mirrored acrylic will visually produce a double image.

TYPE POWER SPEED PPI PASS DEPTH

DEEP RASTER ENGRAVING 100 70 500 1 .010”

COMMENTS: Masking is not necessary because the acrylic is protected from smoke

damage by the mirrored backing.

TYPE POWER SPEED PPI PASS DEPTH

VECTOR ENGRAVING 5 4.0 500 1 .005”

COMMENTS: Again, masking is not necessary because the acrylic is protected from

smoke damage by the mirrored backing.

TYPE POWER SPEED PPI PASS DEPTH

VECTOR CUTTING 75 1.6 500 1 .1”

COMMENTS: Make sure both sides are masked. Dampen and elevate at least 1/8”

above the engraving table. Two passes make a cleaner cut than one. Cut from the

front side of the mirror to prevent heat distortion of the mirrored back surface.