Specifications

1.2 Safety Labels
According to CDRH standards, all interlocked and non-interlocked covers that allow
access to a laser beam MUST have appropriate laser safety labels attached to them.
These labels must be visible to personnel prior to the removal of the covers. Additional
labels must be installed inside the machine and be visible if the covers are removed
from the machine. Labels that provide the manufacturer's name, date of manufacture,
description of product, model number, serial number and compliance statement must
also be visible on the outside of the machine.
All CDRH required labels are properly affixed to the machine in the appropriate
locations at the time of manufacture. These labels are not to be removed. If they
become damaged or removed for any reason, please request additional labels from
Universal Laser Systems Inc.(they will be provided free of charge). Below is a list of all
the labels and their locations on the system.
Manufacturer's Label
Location: On the back of the machine in the lower right corner.
CDRH Compliance Label
Location: On the back of the machine above the Manufacturer's Label.
Warning Label for Interlocked Panels and Doors
Location: On the outside of the top door, on the inside of the top door, and next to the
interlock defeat tool receptacle (visible when door is open). On the outside of the front
door and on the inside of the front door (visible when door is open).
6