Specifications

STANDBY
Then
he “STANDBY” button allows the laser system to shut down the power to the laser
CT”. Files can be downloaded to the laser system while
the “STANDBY” mode. To restore the laser system to full operation, press the
TANDBY” or “ESCAPE” button.
The Indicator Lights
The “GREEN” indicator light will glow solid for the following conditions:
• The laser system is first powered on and ready to receive a file.
• The laser system has finished processing a job and has returned to it’s home
position. The Beeper will also sound off two short beeps.
• The laser system has been paused while running a job.
EEN” indicator light will remain off for the following conditions:
The laser system is firing the beam in the Alignment Mode.
laser system is firing the beam in the Alignment Mode.
dicator light will remain off for the following conditions:
he “RED” indicator light will flash on and off when the top or front door is open.
T
tube and the cooling fans. This is very useful when the user wants to shut down the
laser system without losing the files in the memory buffer. To activate the “STANDBY”
mode, press the “STANDBY” button and the bring the cursor down to the “YES,
ACCEPT” line and press “SELE
in
“S
The “GR
• The top or front door is open.
•
The “GREEN” indicator light will flash on and off when a job is running.
The “RED” indicator light will glow solid for the following conditions:
• The laser system is initializing.
• The
The “RED” in
• The laser system has finished initializing and is ready to receive a file.
• The top and front doors are closed.
T
51