Specifications

4.2 The Control Panel
Control Panel
The control panel on the laser system provides easy access to all of the controls
necessary for cutting and engraving operations. The control panel consists of a liquid
crystal display (LCD), indicator lights, and selection buttons. The following sections
will describe, in detail, how to get around in the menu control system and the
significance of each item in the control panel.
The Menu Control System
The four buttons to the right of the liquid crystal display give complete access to the
menu control system. Use the up and down arrow buttons to move the cursor up or
down through the items on the display and press the “SELECT” button to choose an
item. Some items on the display lead to other menus and some are settings that can be
adjusted. After positioning the cursor on the desired item, press the “SELECT” button
to access that item. The “ESCAPE” button allows backing up through the menu system
to the main menu. The “ESCAPE” and “SELECT” buttons also function for changing a
setting. The “SELECT” button accepts and stores the change and the “ESCAPE” button
exits without changing the setting.
When the laser system is powered on, the laser system will perform a series of
routines. The “INITIALIZING” display will show until the motion system and electronics
have initialized. When completed, the display will read “READY” signifying that the
laser system is ready to accept jobs.
Refer to the diagram on the next page for a detailed view of the menu control system’s
flow chart:
38