Specifications

7. Power setting for plotter pens can only be done at the laser system itself through the
main control panel display. Section 4.2 of this manual will explain how to set the
Power, Speed, and PPI settings for plotter pens. It will also describe how to insert
an “End of File” marker and why it is necessary after every file download. Please
refer to that section for more explicit details. If having trouble with using DOS based
programs, please contact our technical support.
3.4 The ULS Printer Driver for Macintosh
The ULS Printer Driver for Macintosh consists of three parts: the Printer Driver, the
Engrave Monitor, and the Page Setup. Many features of this driver function the same
as they do for the Windows based Printer Driver.
The Printer Driver
The ULS Printer Driver for Macintosh
In the ULS Printer Driver for Macintosh there is only one switch, the “Corel Bitmaps”
switch, that is not present in this driver because it is not necessary to have this switch
for the Macintosh computer system. Please refer to the section on “The ULS Windows
Printer Driver” to understand the function and selection of the different settings the
driver has to offer.
33