User manual

Software Installation and Requirements

Your computer is a critical component in the operation of the VersaLASER system. In fact, you cannot

operate the VersaLASER system if your computer is not connected, powered on, running Windows

and running the Universal Control Panel (UCP) software.

You can only run one VersaLASER system per computer at a time. You will need to purchase a separate

computer for each VersaLASER system you own. The VersaLASER system is not designed to be a

network printer. You must operate the VersaLASER system using the computer that is directly attached

to it via the provided 6-foot USB cable (2 meters). USB cables longer than 6 feet (2 meters) may cause the

VersaLASER system to malfunction.

Computer and Operating System Requirements

Minimum Computer Requirements (User Supplied)

2.0 GHz processor•

Windows XP or Windows Vista*•

1 GB of RAM•

40 GB hard drive (15 GB free space)•

VGA monitor (minimum 1024 x 768 resolution)•

CD-ROM drive/burner•

Mouse and keyboard•

Available USB 2.0 Hi-Speed compliant port only•

Computer speakers (optional)•

600 DPI scanner (optional)•

Internet connection and e-mail address (optional)•

*The VersaLASER system is only compatible with a 32-bit Windows Operating

System. See www.microsoft.com for the minimum computer requirements

to run Windows Vista. The VersaLASER system is not designed to run on the

Macintosh Operating System.

Note: Some computer manufacturers’ USB ports do not comply with USB 2.0 Hi-Speed standards.

This may cause the VersaLASER system to exhibit erratic behavior. Conrm that your computer

complies with USB 2.0 Hi-Speed by checking your computer manual. For more information on USB

2.0 Hi-Speed compatibility, please visit www.usb.org.

Other USB peripheral devices that demand a large amount of computer processing power may slow

down the operation and productivity of the VersaLASER system. If you experience problems with

operation, we recommend you disconnect other USB peripheral devices.