User manual

16
Installation & Set-up Guide
With the assistance of three or four other people, place the system on top 4.
of the cart and loosely install the provided screws that attach the machine
to the cart. Be careful not to pinch your ngers.
Open front door all the way to ensure that it does not come in contact with the cart legs. If 5.
the door should come in contact with the cart legs, gently pull the cart legs apart to ensure
there is non-contact between the door and the cart legs. Securely tighten all the screws and
re-check.
Attach your exhaust system’s wire-reinforced rubber tubing to the exhaust port at the rear 6.
of the laser system and secure with a hose clamp.
Place the VersaLASER system in the desired location for operation.7.
Proceed to page 18 “Laser Cartridge Installation.”