User guide

Link to Table of Contents
User Guide
309
ULS Reference Guide Book
EU Declaration of Conformity
Product Identication: VLS2.30, VLS 3.50, VLS3.60, VLS4.60,
VLS6.60, PLS3.75, PLS4.75, PLS6.75,
PLS6.150D, ILS9.75, ILS9.150D, ILS12.75
and ILS12.150D
Laser Engraving and Cutting Systems
Manufacturer: European Oce:
Universal Laser Systems, Inc. Universal Laser Systems GmbH
16008 N. 81st St. Lerchenfelder Guertel 43
Scottsdale, AZ 85260 A-1160 Vienna/Austria
USA
The manufacturer hereby declares that the equipment specied below
is in conformity with the following directives:
89/336/EEC
73/23/EEC
98/37/EEC
2002/95/EEC
2002/96/ECC
based on the standards listed.
Standards Used:
Safety:
EN 60950: 2002
EN 60825-1: 2002 (Class 3R)
EMC:
EN 55024 1998 (Class A)
EN 55022: 2003 (Class A)
EN 61000-3-2: 2001 (class A)
EN 61000-3-3: 2002
EN 61000-4-2: 2001 (4kV CD, 8kV AD)
EN 61000-4-3: 2003 (3 or 10 V/m)
EN 61000-4-4: 2002 (1 or 2 kV power line)
EN 61000-4-5: 2001 (class 3)
EN 61000-4-6: (3 or 10Vrms)
EN 61000-4-8
EN 61000-4-11
Note: This is not a declaration of conformity. The importer of this
equipment supplies the declaration of conformity.
CAUTION: This is a Class A product. In a domestic environment,
this product may cause radio interference, in which case the
user may be required to take adequate measures.
(EMC Directive)
(Low Voltage Directive)
(Machinery Directive)
(ROHS Directive)
(WEEE Directive)