User guide
Link to Table of Contents
User Guide
69
User Manual
While still in the “Options” dialog box, double-click on “Global” to expand the list. Double-click on “Printing” 10.
to expand the list. Now click on “Driver Compatibility.” Make sure that the laser system name is displayed
in the printer drop-down list. In the “Settings specic for this driver” dialog box, make sure that ALL the
check boxes are UNCHECKED. Now click on “OK” to close the “Options” dialog box.
Click on the outline tool (1), then the outline pen (2) in the yout. With “Graphic” being the only one 11.
selected, click “OK.” Click the down arrow in the Color dropdown box to expand the list and click on the
color red. Click the down arrow in the “Width” dropdown box to expand the list and click “Hairline.” The
units can be “Inches,” “millimeters” or anything else you prefer. Click OK to close the Outline Pen dialog box.
In the top menu, click “Tools” and then click “Color Management.” Click on the down arrow to expand 12.
the “Settings” dropdown list. Click “Color Management O” and then click “OK.”
Remove the Software Installation CD-ROM from your CD-ROM drive and store it either back into its sleeve or in
a safe place.
Finally, at the top of the screen, click on “Tools,” then “Save settings as Defaults.”13.
The setup defaults for CorelDRAW X3/X4 are now complete. Whenever you start a new document, all of 14.
the default settings that you set up will automatically apply to the new document.