User guide
Link to Table of Contents
User Guide
26
User Manual
Focus View (drop down list)
The Focus View allows you to move the focus carriage to a desired position on the laser system table.
To have a full range of motion of the X-Axis arm, verify that you are zoomed out in the preview window by •
right-clicking on the mouse before entering the manual focus window.
Moving the cursor over the preview window once the focus button has been clicked changes your cursor •
to a blue target with dashed vertical and horizontal lines. Clicking once on the preview window moves the
focus carriage to that position. Selecting another feature from the drop down list terminates the focus
feature and moves the focus carriage to the home position.
To move the focus carriage to a specic location, click the GO button. Type in the X and Y coordinates. Once •
you have nished typing in the coordinates, press the GO button within the Focus window and the focus
carriage will move to the specied location. You can also move the engraving table to a specic Z-height by
entering the height in the Z box.
Focus window
Estimate View (drop down list)
The “estimate” feature approximately calculates the amount of time it will take the laser system to nish
the engraving or vector cutting job. The more complex the engraving job is, the longer it will take to nish.
The less complex the engraving job is, the less time it will take to nish.