Setup guide

Universal Laser Systems VersaLASER VLS2.30 and VLS3.50 Installation and Setup Guide
Assembling Your VLS System
Unpacking the VLS
CAUTION: Do not attempt to move or lift this system alone. Obtain assistance from two or three
additional people when lifting or carrying (secure motion system and doors before lifting). Bodily
injury may occur if improper lifting techniques are used or the system is dropped.
Unpack the laser system from its packaging.1.
Familiarize yourself with the instructions before getting started.
With the assistance of one or two other people, pick up the VersaLASER and place it on top of2.
a table strong enough to support its weight (refer to the speci cations section on the CD).
Remove any paperwork placed on the top door.3.
Open the top door by lifting up on the handle.4.
If you purchased the Computer Controlled Air Cleaner Cart, proceed to the Accessories section on the CD for
installation instructions. If you plan on placing the laser system on top of a table, continue with the follwing steps.