Setup guide

Universal Laser Systems VersaLASER VLS2.30 and VLS3.50 Installation and Setup Guide
Universal Control Panel (UCP) Installation CD-ROM
At this point you need to install the Windows XP/Vista Universal Control Panel (UCP) and printer driver. In order to
install the software, you need to have administrative privileges on the computer before starting installation. The
Software Installation CD-ROM can be found on the inside of this manual reference guide.
Insert the Software Installation CD-ROM into your PC’s CD drive. It should automatically launch the “1.
Universal
Control Panel Installation” window. Select the laser series you are installing on the computer.
Note: If the setup window does not automatically launch, you can launch it manually. Locate your CD or
DVD drive using Windows Explorer and click on the Setup.exe application to launch the setup window.
Note: If you choose to only install the “Universal Control Panel,” you will need to proceed to step 4.
Select the components you would like to install on your computer, then select the “2. Next” button.
If you have selected to install the Printer Driver, you will then be prompted to select the laser system you3.
would like to install on the computer. Once selected, click the “Next” button.