Setup guide

Universal Laser Systems VersaLASER VLS2.30 and VLS3.50 Installation and Setup Guide
The laser system comes equipped with a high quality, 6-foot (1.82 meters) USB 2.0 certi ed cable. We recommend
you use this provided cable.
CAUTION: Do not use any adapters, extension cables, USB cable longer than 6 feet (1.82
meters) or other devices between the computer’s USB port and the port on the laser system;
sporadic or unpredictable behavior may result.
USB 2.0 Hi-Speed (Only)5.
Connect the USB cable provided between the USB port of the computer and the USB port on the back ofa.
the VLS laser system. Do not use a USB cable longer than 6 feet (1.82 meters).
After connecting the USB cord, the “b. Found New Hardware Wizard” will open. Select “No, not at this time.”
Then click “Next” to continue.