Instructions / Assembly

Regular Arm Installation

Top Jamb Installation

Parallel Arm Installation

Left Hand Door - LH

Right Hand Reverse - RHR

Left Hand Door - LH

Right Hand Reverse - RHR

Left Hand Door - LH

Right Hand Reverse - RHR

Right Hand Door - RH

Left Hand Reverse - LHR

Right Hand Door - RH

Left Hand Reverse - LHR

Right Hand Door - RH

Left Hand Reverse - LHR

HINGE SIDE

Remove door closer to be replaced. Determine door handing and installation type. Align holes in the mounting plate with the existing

mounting holes in the door or the jamb (for Top Jamb installations).

Notes:

• When installing mounting plate, make sure you can see the FRONT of the plate with properly marked handing and that the HINGE side

of plate matches illustrations shown. Plate is marked with a sticker that designates the front and hinge side.

• The mounting plate will have to be ipped when used in a parallel arm installation so the hinge sticker is facing opposite side of

illustration. Flip plate from left to right or right to left. DO NOT FLIP PLATE FROM TOP TO BOTTOM.

UNIVERSAL MOUNTING PLATE

UH4061/UH4062 INSTALLATION INSTRUCTIONS

999-30014

PAGE 1
999-30014 UNIVERSAL MOUNTING PLATE UH4061/UH4062 INSTALLATION INSTRUCTIONS Remove door closer to be replaced. Determine door handing and installation type. Align holes in the mounting plate with the existing mounting holes in the door or the jamb (for Top Jamb installations). Notes: • When installing mounting plate, make sure you can see the FRONT of the plate with properly marked handing and that the HINGE side of plate matches illustrations shown.
PAGE 2
999-30014 UNIVERSAL MOUNTING PLATE UH4061/UH4062 INSTALLATION INSTRUCTIONS 2 Attach mounting plate to the door or jamb by either using the fasteners from the closer being replaced or the fasteners supplied with the UH4061/UH4062 door closer. For the supplied fasteners, use the “Preparation for Fasteners” chart on Page 2 of the closer instructions to identify the fasteners to be used.