Instructions / Assembly

ManualsBrandsUniversal Hardware ManualsKitchenHeavy-Duty All-in-One Aluminum Commercial Door Closer

UNIVERSAL

HARDWARE

The Professional’s Choice

DOOR CLOSER

UH4061 & UH4062 INSTALLATION INSTRUCTIONS

FOR CUSTOMER CARE CALL TOLL FREE 800-562-5625 or info@hamptonproducts.com

PAGE 1

MULTI SIZE 1 THRU 6 — NON HOLD OPEN DOOR CLOSER

CAUTION! An incorrectly installed or improperly adjusted door closer can cause property damage or personal injury. These instructions should be followed

to avoid the possibility of misapplication or misadjustment.

Closer mounts opposite

of hinge side of door (push side)

Closer cover not shown.

See Page 5.

Left hand door-LH

Right hand door-RH

Left hand door-LH

Right hand door-RH

Closer mounts on hinge side of door (pull side)

Closer cover not shown.

Regular Arm Installation

Top Jamb Installation

Parallel Arm Installation

See Page 3.

Closer mounts on frame,

opposite hinge side of door (push side)

Closer cover not shown.

See Page 4.

Left hand door-LH

Right hand door-RH

Summary of content (6 pages)

PAGE 1
UNIVERSAL HARDWARE DOOR CLOSER UH4061 & UH4062 INSTALLATION INSTRUCTIONS The Professional’s Choice MULTI SIZE 1 THRU 6 — NON HOLD OPEN DOOR CLOSER CAUTION! An incorrectly installed or improperly adjusted door closer can cause property damage or personal injury. These instructions should be followed to avoid the possibility of misapplication or misadjustment. Regular Arm Installation Closer mounts on hinge side of door (pull side) See Page 3. Closer cover not shown.
PAGE 2
Components: Figure 1 Forearm Screw Backcheck Valve Forearm Forearm Shoe Screw Latch Speed Valve Main Arm Forearm Shoe Sweep Speed Valve Standard Closer Mounting Plate For mounting plate installation, refer to supplemental installation sheet. Main Arm Screw Closer Arm Parallel Arm Plate Screw Package Through Bolt and Screw Plastic Cover • It is recommended that the door be hung on ball bearing type hinges so door swings freely.
PAGE 3
REGULAR ARM INSTALLATION UH4061 & UH4062 INSTALLATION INSTRUCTIONS 5-1/2" (140 mm) "A" 1-3/4" (44 mm) Right hand door shown 1-3/16" (30 mm) 1-3/16" (30 mm) 3/4" (19 mm) HINGE 12" (305 mm) CL of Hinge Opening Dimensions "A" To 100° 7-1/2" (191 mm) To 130° 6" (152 mm) To 180° 4-1/2" (114 mm) Main Arm Installation Instructions INSTALLATION SEQUENCE 1. Select degree of opening and use dimensions shown to locate 4 holes on door for closer body and 2 holes on frame face for forearm shoe. 2.
PAGE 4
TOP JAMB INSTALLATION UH4061 & UH4062 INSTALLATION INSTRUCTIONS 12" (305 mm) "A" Left hand door shown 3/4" (19 mm) 5-1/2" (140 mm) 1/2" (13 mm) 1-7/8" (30 mm) 1-3/4" (44 mm) Opening Dimensions "A" To 100° 7-1/2" (191 mm) To 130° 6" (152 mm) To 180° 4-1/2" (114 mm) HINGE OPPOSITE SIDE Main Arm Installation Instructions CL of Hinge Top View INSTALLATION SEQUENCE 1.
PAGE 5
PARALLEL ARM INSTALLATION UH4061 & UH4062 INSTALLATION INSTRUCTIONS CLof Hinge Left hand door shown 2-3/4" (70 mm) "A" 7/16" (11 mm) 1/2" (13 mm) FRAME 2" (51 mm) DOOR Opening Dimensions "A" Dimensions "B" To 120° 9-1/2" 3-3/4" (95 mm) To 180° 7" 1-1/4" (32 mm) HINGE FRAME HINGE OPPOSITE SIDE 3-1/2" (89 mm) INSTALLATION SEQUENCE 1. Select degree of opening and use dimensions shown to locate 4 holes on door for closer body and 4 holes underside of frame for PA plate. 2.
PAGE 6
Closer Adjustment Closing Speed Controls (Figures 1 and 2) • • Valve "S" controls sweep range Valve "L" controls latch range Closing Speed Controls Closing Speed Controls Figure 1 Lat ch sweep ran ge Figure 2 "L" (latch) "S" (sweep) 10° SLOW SLOW FA S T FA S T Closed Standard Closing cycle Closing Power Control (Figure 3) Opening Door Control (Figures 4 and 5) • • Adjusted as required (see charts on pages 3, 4, & 5) Closing Power Control Figure 3 To increase power turn clockwise 13 tur