Installation Guide

UNIVERSAL
HARDWARE
The Professional’s Choice
UNIVERSAL MOUNTING PLATE
UH4061/UH4062 INSTALLATION INSTRUCTIONS
Regular Arm Installation
Top Jamb Installation
Parallel Arm Installation
Left Hand Door - LH
Right Hand Reverse - RHR
Left Hand Door - LH
Right Hand Reverse - RHR
Left Hand Door - LH
Right Hand Reverse - RHR
Right Hand Door - RH
Left Hand Reverse - LHR
Right Hand Door - RH
Left Hand Reverse - LHR
Right Hand Door - RH
Left Hand Reverse - LHR
HINGE SIDE
HINGE SIDE
HINGE SIDE
HINGE SIDE
HINGE SIDE
HINGE SIDE
HINGE SIDE
HINGE SIDE
HINGE SIDE
HINGE SIDE
HINGE SIDE
HINGE SIDE
Remove door closer to be replaced. Determine door handing and installation type. Align holes in the mounting plate with the existing
mounting holes in the door.
Notes:
• When installing mounting plate; make sure you can see the FRONT of the plate with properly marked handing and that the HINGE side
of plate matches illustrations shown. Plate is marked with a sticker that designates the front and hinge side.
• The mounting plate may have to be ipped in some cases when used in a parallel arm installation so the hinge sticker is facing opposite
side of illustration. Flip plate from left to right or right to left. DO NOT FLIP PLATE FROM TOP TO BOTTOM.
1