Instructions / Assembly

DOOR CLOSER
UH4007, UH4008, UH4013 & UH4014 INSTALLATION TEMPLATES
FOR CUSTOMER CARE CALL TOLL FREE 1-877-701-7837 or [e-mail]
TEMPLATE #1 RIGHT HAND INWARD OPENING DOOR
TEMPLATE #3 RIGHT HAND OUTWARD OPENING DOOR
Opening to 120° for
UH4007 or UH4008
UH4013 or UH4014
Opening to 120° for
UH4007 or UH4008
UH4013 or UH4014
Opening to 155° for
UH4007 or UH4008
UH4013 or UH4014
Opening to 155° for
UH4007 or UH4008
UH4013 or UH4014
Opening to 155° for
UH4007 or UH4008
UH4013 or UH4014
Opening to 120° for
UH4007 or UH4008
UH4013 or UH4014
Template for jamb
Cut on line
Body screw holes
Speed Adjusting Valve
Cut on line
Speed Adjusting Valve
Forearm Shoe screw holes
Cut on line
Forearm Shoe screw holes
Template for door
TEMPLATE FOR RIGHT HAND
INWARD OPENING DOOR
TEMPLATE FOR RIGHT HAND
OUTWARD OPENING DOOR
Cut on line
Place this line at
top edge of door
Place this line at
lower edge of top jamb
Place this line at
top edge of door
Place this line against
edge of door (hinge side)
Place this line against
edge of door (hinge side)
Body screw holes
Place this line vertical
with Forearm Shoe template
Place this line vertical
with Forearm Shoe template
Place this line against
edge of door (hinge side)
Place this line against
edge of door (hinge side)
0
1"
2"
3"
ATTENTION:
BEFORE CUTTING OR DRILLING:
VERIFY TEMPLATE IS TO SCALE
999-30012