Installation Guide

BEFORE STARTING THE INSTALLATION
Compare the requirements of the installation with the specications
below, to make sure the correct model of CLOSER will be installed.
(RIGHT HAND DOOR) (LEFT HAND DOOR)
Ref No.
Name of Parts
Qty.
1
2
3
4
5
6
7
8
Closer Body
1
Main Arm
1
Forearm Connecting Screw & Lockwasher
1
1
Forearm Connecting Washer
1
Forearm and Arm Shoe
Oval Head Sheet Metal Screw, #12 X 1-1/2"
4
Oval Head Machine Screw, 12-24 X 3/4"
4
Truss Head Sheet Metal Screw, #12 X 1-1/4"
2
10
Closer Body Cover
1
11
Main Arm Connecting Screw & Lockwasher
1
12
Main Arm Flat W asher
1
9
Truss Head Machine Screw, 12-24 X 3/4"
2
1. PARTS AND ASSEMBLY DIAGRAM
2. LOCATION OF CLOSER ON THE DOOR
3-4. INSTALLATION PROCEDURE
10
4
1
2
5
6
7
8
9
11
12
3
Tools needed for installation: hammer, Phillips head screwdriver, punch, electric drill, tape, #12-24 tap for metal doors and jambs.
Check that all parts shown in the parts list and in the illustration are present. Match screw size and type to hardware drawing.
Determine whether the door is left or right hand using the following illustrations. Remember that the CLOSER is always mounted inside the building near the hinge
edge of the door.
(RIGHT HAND DOOR) (LEFT HAND DOOR)
DOOR CLOSER
INSTALLATION INSTRUCTIONS FOR MODELS
UH4007, UH4008, UH4013 & UH4014
999-30011
Type
Closer Size
Maximum Door Width
Maximum Door Weight
Maximum opening angle for closer
(mounted on door or top jamb)
UL 3 Hr Fire Rated
3
38"
125 lbs
120˚ or 155°
3A. POSITIONING TEMPLATE
Templates to help position the CLOSER correctly are provided on an enclosed sheet, BE SURE TO USE CORRECT TEMPLATE. Decide the maximum opening angle
for the door (120° or 155°) before cutting out the template. The template must be cut differently for each angle.
2A. INWARD OPENING DOOR
This illustration shows the mounting for inward opening doors, as seen from
inside the building.
2B. OUTWARD OPENING DOOR
This illustration shows the mounting for outward opening doors, as seen from
inside the building.
For Customer Care call: Toll Free 1-877-701-7837 or [e-mail]
©2021 Hampton Products International Corp.
999-30011_Eng REVD 04/21
50 Icon, Foothill Ranch, CA 92610-3000 USA
1-877-701-7837
FOR WOOD OR METAL
FOR METAL ONLY
For Closer Body
( 6 )
( 7 )
( 9 )
( 8 )
For Arm Shoe