DolphinTM Water-Proof Remote Control Balboa Instruments Incorporated
TABLE OF CONTENTS INTRODUCTION Introduction . . . . . . . . . . . . . . . . . . . . . . . .3 Features And Functions . . . . . . . . . . . . . . . .4 Key Charts . . . . . . . . . . . . . . . . . . . . . . . . . .5 Installing Batteries . . . . . . . . . . . . . . . . . . . .7 Programming TV Control . . . . . . . . . . . . . . .8 Setup Codes for TVs . . . . . . . . . . . . . . . . . . .8 Programming VCR Control . . . . . . . . . . . . .12 Setup Codes for VCRs . . . . . . . . . . . . . . . . .
FEATURES AND FUNCTIONS Use the illustration below to locate the Dolphin features and study the key locations (on the next two pages) to learn how they function. The LED (red light) blinks to show that the remote control is working and is sending signals. Press POWER once to turn on or off the selected home entertainment component. Use SETUP for all programming sequences. Press AUDIO, VCR, TV, or CBL once to select a home entertainment component to control.
FEATURES AND FUNCTIONS INSTALLING BATTERIES …Continued 1. On the back of the Dolphin Remote, remove the screws that hold the battery cover in place and lift off the battery cover. Use GUIDE to display the program guide. Use EXIT to exit out of your cable converter’s menu and guide. Use the four directional keys to move the cursor in the program guide and menu screens. 2 Obtain two (2) fully-charged AA alkaline batteries.
PROGRAMMING TV CONTROL NOTE: If you own a TV/VCR combination, skip thi section and perform “Programming TV/VCR Combo Control” on page 16. Locate the brand name of your TV in the Setup Codes For TVs section below, and write it in the following space. TV Brand: The brands are listed in alphabetical order with the most popular codes listed first.You will use one of these codes to program the Dolphin to operate your TV: 1. Turn on the TV. On the Dolphin, press TV once.
KEC KTV Kaypani Kenwood Kloss LG LXI Logik Luxman MEI MGA MTC Magnavox Majestic Marantz Matsushita Megatron Memorex Midland Minutz Mitsubishi Motorola Multitech NAD NEC NTC Nikko Noshi Onwa Optimus Optonica Orion Panasonic Penney Philco Philips Pilot Pioneer Portland Prism Proscan Proton Pulsar Quasar RCA Radio Shack Realistic Rhapsody Runco 10 0180 0180, 0030, 0039, 0185, 0280 0052 0030, 0019 0024, 0046 0056 0047, 0054, 0154, 0156, 0178 0016 0056 0185 0150, 0030, 0178, 0019 0060, 0030, 0019, 0056, 0185 00
PROGRAMMING VCR CONTROL NOTE: If you own a TV/VCR combination, skip this section and perform “Programming TV/VCR Combo Control” on page 16. Locate the brand name of your VCR in the Setup Codes For VCRs section below, and write it in the following space. VCR Brand: The brands are listed in alphabetical order with the most popular codes listed first.You will use one of these codes to program the Dolphin to operate your VCR: 1. Turn on your VCR and insert a video cassette. 2. On the Dolphin, press VCR once.
Magnavox Magnin Marantz Marta Matsushita Memorex Minolta Mitsubishi Motorola Multitech NEC Nikko Nikon Noblex Olympus Optimus Optonica Orion Panasonic Penney Pentax Philco Philips Pilot Pioneer Portland Profitronic Proscan Protec Pulsar Quarter Quartz Quasar RCA Radio Shack Radix Randex Realistic Ricoh Runco STS Samsung Sanky Sansui Sanyo Scott Sears Semp Sharp 14 0035, 0039, 0081, 0000, 0149 0240 0035, 0081 0037 0035, 0162 0035,0037, 0048, 0039, 0047, 0240, 0000, 0104, 0162, 0046, 0307 0042, 0105 0048, 0
PROGRAMMING TV/VCR COMBO CONTROL Locate the brand name of your TV/VCR Combo in the Setup Codes For TV/VCR Combos section below, and write it in the following space. TV/VCR Combol Brand: The brands are listed in alphabetical order with popular codes listed first.You will use one of these codes to program the Dolphin to operate your TV/VCR Combo: 1. Turn on your TV/VCR Combo and insert a video cassette. 2. On the Dolphin, press VCR once. Press and hold SETUP until the LED blinks twice, then release SETUP. 3.
PROGRAMMING CABLE CONVERTER (OR SATELLITE RECEIVER) CONTROL 5. Write your Cable Converter or DBS Receiver code in the boxes below for future reference. Before you program the control to operate a cable or satellite converter, you’ll need to perform the following instructions to unlock the cable key, enter in a new code, and lock the cable key again. NOTE: Remember, to use the Dolphin to operate your Cable Converter or DBS Receiver, press CABLE first. To unlock the Cable key: 1.
Setup Codes for DBS Receivers: AlphaStar Echostar Expressvu General Instrument HTS Hitachi Hughes JVC Jerrold Magnavox Memorex Next Level Panasonic Philips Primestar RCA Sony Star Choice Toshiba Uniden Zenith 0772 0775 0775 0627, 0361, 0869 0775 0819 0749 0775 0627, 0361 0724, 0722 0724 0869 0701 0724, 0722 0627, 0361 0566 0639 0869 0790 0724, 0722 0856 PROGRAMMING CHANNEL CONTROL LOCK By activating this feature, the Dolphin will only allow access to the channel control capabilities of your cable converte
PROGRAMMING AUDIO CONTROL Using the Dolphin’s RCVR mode, you can also control an audio component, such as CD or DVD player, a stereo receiver, a stereo amplifier, or a DBS audio service. Locate the brand name of your audio component in the one of accompanying code lists (starting on the next page).Write it in the appropriate space.
Setup Codes for DVD Players: JVC Kenwood Magnavox Mitsubishi Onkyo Panasonic Philips Pioneer Proscan RCA Samsung Sony Technics Toshiba Yamaha Zenith 0558 0534 0503 0521 0503 0490 0503, 0539 0525, 0571 0522 0522 0573 0533 0490 0503 0490 0503 Setup Codes for Stereo Receivers: ADC 0531 Aiwa 0158, 0189, 0121 Capetronic 0531 Carver 0189 Curtis Mathes 0080 Denon 0004 Garrard 0463 Harman/Kardon 0110, 0189 JBL 0110 JVC 0074 Kenwood 0027, 0186 Linn 0189 MCS 0039 Magnavox 0531, 0189 Marantz 0039, 0189 Onkyo 0135 Op
SEARCHING FOR YOUR CODE CHECKING THE CODES If your TV, VCR, Cable Converter or Audio Component does not respond to the Dolphin after trying all of the codes listed for your brand, or if your brand is not listed at all, try searching for your code.
RE-ASSIGNING DEVICE KEYS CHANGING VOLUME LOCK The Dolphin can be set up to control a second TV or VCR, or any combination of four home entertainment components. For example, to have the Dolphin control a TV, a Cable Converter, and two VCRs, you will need to re-assign the unused AUDIO key to operate the second VCR as follows: The Dolphin is set to control volume of a component through your TV while in the TV,VCR, or Cable mode.
USING THE LEARNING FEATURE You can program the buttons to add functions that are unique to your home entertainment devices (e.g.,VCR Tracking Up or Down). NOTE: Please have your original remote controls handy before programming learning. Be sure to press each key within 10 seconds of the previous entry. If not, the remote control will exit the programming mode. Original Remote Programming A Learning Key 1. Press and hold SET until the LED (red light) blinks twice, then release SET. 2. Enter 9 - 7 - 5.
USING THE IR/RF COMMAND CENTER home theater device from another room, try performing the following installation: The Dolphin Remote Control (URC-9811) can be used with an optional IR/RF Command Center which receives radio-frequency (RF) signals from the Dolphin, anywhere in your home, up to 100 feet away*. 2. Run the IR Signal Extension Cord to the device that is not in line-of-sight of the IR/RF Command Center.
SPECIFICATIONS Remote Control Power 2 AAA Batteries IR/RF Console Power 120 Vac Remote Control to IR/RF Console Range up to 100 Feet (30.48 m)* IR/RF Command Console to Device Range 25 Feet (7.62 m) ± 30° Remote Control Dimensions (H x W x D) 9-2⁄16 x 2-10⁄16 x 1-3⁄16 in. 232 x 65 x 31 mm IR/RF Command Console Dimensions (H x W x D) 1-9⁄16 x 5 -1⁄16 x 4 in 39.7 x 128.6 x 101.6 mm Remote Control Weight (without Batteries) 8 oz (220 g) IR/RF Command Console Weight 10.
TROUBLESHOOTING PROBLEM: LED does not blink when you press a key. SOLUTION: Replace the batteries with two (2) new AA alkaline batteries (see page 7). PROBLEM: LED blinks when you press a key, but home entertainment component does not respond. SOLUTION: Make sure you are aiming the Dolphin at your home entertainment component and that you are within 15 feet of the component you are trying to control. PROBLEM: The Dolphin does not control home entertainment components or commands are not performing properly.
