User's Manual Part 4

KAMELEON 8-DEVICE REMOTE
54 Troubleshooting
PROBLEM: The bottom two IR indicator segments are flashing.
SOLUTION: Replace batteries with four new AA alkaline batteries.
PROBLEM: No display when programming.
SOLUTION: Display has turned off due to inactivity. Start programming
again and do not pause while performing instructions.
PROBLEM: During programming, the two bottom IR segments display
a long flash.
SOLUTION: An invalid entry has occurred. Check the keys to be pressed
and start program again.
PROBLEM: How do I stop programming?
SOLUTION: Press HOME once to return to the Program Keys screen.
Press HOME once more to exit completely.
PROBLEM: The unit does not control home entertainment devices or
commands are not working properly.
SOLUTION: Try all listed codes for the device brands being set up.Make
sure they can be operated with an infrared remote control.
PROBLEM: Tried Searching For Your Code method and still could not
find a working code.
SOLUTION: Perform Restoring Factory Default Settings on page 42. Then
repeat Searching For Your Code on page 19.
PROBLEM: Cannot program a macro onto M1 – M4 or POWER keys.
SOLUTION: Make sure the total number of key presses being
programmed is less than 15.
PROBLEM: Power macro does not execute.
SOLUTION: First, press the Home Theater key once, then press POWER
once.
PROBLEM: Favorite channel function does not work properly.
SOLUTION: Some devices (e.g.,Cable Boxes or Satellite Receivers) use
two-digit channel numbers. During programming, press
ENTER or OK once after entering a channel number (e.g., 0 2
ENTER for channel 2). See Programming Favorite Channel
Scan on page 41.
PROBLEM: Changing channels does not work properly.
SOLUTION: If the original remote control required pressing ENTER to
change channels, then press ENTER on the remote control
after entering channel numbers.
PROBLEM: No remote control of volume.
SOLUTION: See Changing Volume Lock on page 27 to lock/unlock
volume.
PROBLEM: Two bottom IR segments flash when a key is pressed, but
home entertainment device does not respond.
SOLUTION: Make sure the remote control is aimed at your home
entertainment device and is not farther than 15 feet away.
PROBLEM: CH! and CH"do not work for your RCA TV.
SOLUTION: Due to RCA design (1983-1987), only the original remote
control will operate these functions.
PROBLEM: Pressing SCROLL one or times in CD, DVD, PVR or Home
Theater mode, does not display a secondary menu screen.
SOLUTION: Even though SCROLL is displayed, for these modes, there are
no additional menu screens.
PROBLEM: Cannot program my combo device code.
SOLUTION: Make sure have selected the correct device key for your
combo code.
OFA Kameleon wRF UG rev 3.fm Page 54 Monday, August 16, 2004 8:19 PM